Main PageCopying > Creating a Disc Using a Connected Blu-ray Recorder

Creating a Disc Using a Connected Blu-ray Recorder

You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable.

Connect the USB cable and the AC adapter.

Turn off the camcorder by pressing the POWER_BUTTON button for about 2 seconds.

C1DW_Backup_BDrecorder
sub_step1
Connect using the provided USB cable.
sub_step2
Connect the AC adapter to this unit.

This unit powers on automatically when the AC adapter is connected.

Be sure to use the supplied JVC AC adapter.

The “SELECT DEVICE” screen appears.

Tap “CONNECT TO OTHER”.

CONNECT TO OTHER

Tap the desired media.

C1DW_CONNECT_TO_OTHER1

Perform dubbing on the Blu-ray recorder.

Refer also to the instruction manual of the Blu-ray recorder.

Caution

  • MP4(MVC) videos cannot be copied.

Memo

  • The created discs are playable only on AVCHD compatible devices (such as Blu-ray recorders).

For customers who completed the firmware update

  • Videos recorded in AVCHD 3D format cannot be saved to the Blu-ray recorder that are not compatible with AVCHD 3D.
  • Videos recorded in AVCHD 3D format can only be played back on Blu-ray recorder etc., that is compatible with AVCHD 3D.