For specifying network-related settings.
The display of the software keyboard for input varies according to the item you are setting.
Network/Settings Item 
Web
For setting the functions that make use of the web browser.
Web Access
To access via a web browser, set to “On”.
[Setting Values: 
On, Off]
Camera Name
For setting the name displayed on the web browser. Enter not more than 8 characters using the software keyboard.
(Default value: HM200)
Login Name (Fixed)
The login name is “jvc”. It cannot be changed.
Login Password
Changes the password for accessing via a web browser.
The current password is displayed. Enter a new password directly.
Enter not more than 31 characters using the software keyboard.
Live Streaming Set
For specifying settings for distributing live video images.
Memo
Users cannot access this menu in the following cases.
When [Record Format] 
[System] is set to “4K” or “HD+Web”
When [Record Format] [Frame Rate] is set to “24p”
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, Off]
Memo
“On” cannot be selected if network connection is not established.
“On” cannot be selected when FTP is running.
Live streaming switches to “Off” when the power is turned off.
Server
For selecting the server for live streaming.
[Setting Values: Server1, Server2, Server3, Server4]
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
Streaming Server
For setting the server for live streaming.
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
Server1/Server2/Server3/Server4
The name that is set in [Alias] is displayed individually.
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Server] options.
The default value is “Server1/Server2/Server3/Server4”.
You can enter up to 31 characters and ASCII characters.
Type
For setting the system to transfer videos for distribution.
[Setting Values: MPEG2-TS/UDP, MPEG2-TS/TCP, RTSP/RTP, ZIXI, RTMP]
Memo
Use reception devices that are compatible with the respective transfer systems.
To use the “ZIXI” setting, a dedicated server is needed separately.
The following items that can be set vary depending on the setting of this item.
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Destination URL
For entering the URL of the live distribution destination beginning with “rtmp://”.
There is no default value (blank).
You can enter up to 191 characters and ASCII characters.
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
When [Type] is set to “MPEG2-TS/UDP” or “MPEG2-TS/TCP”, the default value is “6504”. If “ZIXI” is set, the default value is “2088”.
Stream ID
For setting the registered stream ID of the live distribution destination.
The default value varies with the product model.
Enter not more than 63 characters.
Stream Key
Enter the stream key specified at the live transmission destination.
There is no default value (blank).
Enter not more than 63 characters.
Password
For setting the [Stream ID] password.
There is no default value (blank).
Enter not more than 127 characters. Enter not more than 31 characters for RTSP/RTP setting.
Latency
For setting the latency mode.
[Setting Values: Minimun(ZIXI Off), Low, Medium]
Resolution
For setting the resolution of the video image during live distribution.
The available options vary according to the settings for [ 
Resolution] and [ Frame Rate] under [Record Format].
|
|
|
Setting values |
|---|---|---|
|
1920x1080 |
60p, 30p |
|
|
50p, 25p |
|
|
|
60i |
|
|
|
50i |
|
|
|
1280x720 |
60p |
1280x720, 720x480, 480x270 |
|
50p |
1280x720, 720x576, 480x270 |
|
|
720x480
|
60i |
720x480, 480x270 |
|
720x576
|
50i |
720x576, 480x270 |
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
The Aspect Ratio for the live streaming image is fixed to “16:9”.
Frame & Bit Rate
For setting the frame rate and encoding bit rate of the video image during live distribution.
The available options vary according to the settings for [Resolution] and [Record Format] above, as well as [ Frame Rate].
|
|
Resolution |
Setting values |
|---|---|---|
|
60p, 60i, 30p |
1920x1080 |
60i (12.0 Mbps), |
|
1280x720 |
30p (8.0 Mbps), |
|
|
720x480 |
60i (8.0 Mbps), |
|
|
480x270 |
30p (0.2 Mbps) |
|
|
50p, 50i, 25p |
1920x1080 |
50i (12.0 Mbps), |
|
1280x720 |
25p (8.0 Mbps), |
|
|
720x576 |
50i (8.0 Mbps), |
|
|
480x270 |
25p (0.2 Mbps) |
Memo
The setting cannot be changed during live streaming (Live Streaming set to “On”).
An encoding bit rate exceeding 8.0 Mbps cannot be selected when [Type] is set to “RTSP/RTP”.
An encoding bit rate exceeding 5.0 Mbps cannot be selected when [Type] is set to “ZIXI” and [Latency] is set to other than “Low”, or when [Type] is set to “RTMP”.
An encoding bit rate exceeding 3.0 Mbps cannot be selected when [Type] is set to “ZIXI” and [Latency] is set to “Low”.
Depending on the type of network adapter used and the connection, the images and audio sound during live streaming can be choppy.
Connection Setup
For configuring the network connection settings.
A [Wizard] screen will appear according to the adapter connected to the [HOST] terminal. Follow the instructions to perform the setting.
You can Load, Store, and Delete the settings specified on the [Wizard] screen.
Wizard
A [Wizard] appears according to the adapter connected to the [HOST] terminal.
Follow the instructions.
Load
Loads the settings on the [Wizard] screen.
Store
Saves the settings on the [Wizard] screen.
Delete
Deletes the saved settings.
Metadata Server
For registering the FTP server for importing the metadata and the path of the file to be imported.
Up to 4 settings can be registered.
Meta-FTP1 to Meta-FTP4
(The name specified in the respective [Alias] items is displayed)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Import Metadata] options.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
[Setting Values: FTP, SFTP, FTPS, FTPES]
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
File Path
Enter the path name for the metadata file (“/pub/meta.xml”, “/home/user/meta2.xml”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
Memo
When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.
Clip Server
For setting the server and directory for uploading recorded clips in the SD card to the FTP server.
Clip-FTP1 to Clip-FTP4
(The name specified in the respective [Alias] items is displayed)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
[Setting Values: FTP, SFTP, FTPS, FTPES]
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
Dir. Path
Enter the path name for the directory to upload to (“/pub”, “/home/user”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
Memo
When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.
Reset Network
Restores all items in the [Network] menu to their default settings.
