Turning On/Off the Power

Turning On the Power

Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “ON”.

The camera recorder starts up in Camera mode and is ready for shooting.

Memo

The camera recorder always start up in Camera mode when the [POWER ON/OFF] switch is set to “ON”. Use the [MODE] button at the side of the camera recorder to switch mode.

360EC_PowerON_01

Turning Off the Power

Sets the camera recorder to the recording standby or stop mode.

Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “OFF”.
Remove the battery and the power to the [DC] terminal (when not in use for a long time).

Auto Power Off function

When [System] arrowR [Auto Power Off] is set to “On”, the power turns off automatically when the camera recorder is not operated for 5 minutes or longer while running on battery.

Memo

When both the battery and AC adapter are connected, power from the AC adapter connection will be used. As such, the [Auto Power Off] function will not have any effect.

Caution

Do not set the [POWER ON/OFF] switch to “OFF” during recording. Check that the operation mode display is “STBY” or “STOP” before you turn off the power.

If you have mistakenly set the [POWER ON/OFF] switch to “OFF” during recording, wait for 5 seconds or more before you turn on the power again.

When turning off the power, first set the [POWER ON/OFF] switch of the camera recorder to “OFF”. Do not remove the battery or turn off the AC power while the [POWER ON/OFF] switch is set to “ON”.