Adjusting the LCD Monitor

360EC_LCD_MoiniAdjust
Open the LCD cover.
Incline the LCD monitor to a position that enables easy viewing.

Rotate the LCD monitor to adjust the angle.

While the LCD monitor is open, you can rotate it 180 degrees upward or 90 degrees downward.

Rotating the LCD monitor 180 degrees upward enables you to see the screen from the lens side. To display the image when it is viewed from the opposite direction (mirror image), perform setting as follows.
Set [Main Menu] arrowR [LCD/VF] arrowR [LCD Mirror] to “Mirror” arrowR Set button ( REC button )

Adjust the brightness, contour, and contrast of the LCD monitor.

You can change the angle and brightness of the LCD monitor according to your usage condition.
Changing the brightness of the screen will not affect the recorded images.

Adjusting the Brightness

Use the [LCD BRIGHT +/-] button to adjust the brightness of the LCD monitor.

The [+] button brightens the monitor and the [-] button darkens it.

Press the [+] and [-] buttons simultaneously to return to standard settings.

During adjustment, the brightness level is displayed on the LCD monitor.

JY-HM360EC_LCD_Monitor_Adjust02

Adjusting the Contour

Use the [PEAKING +/-] button to adjust the contour of the LCD monitor.
(The contour of the viewfinder screen will also be adjusted at the same time.)

The [+] button increases contour correction and the [-] button decreases contour correction.

Press the [+] and [-] buttons simultaneously to return to standard settings.

During adjustment, the contour level is displayed on the LCD monitor.

JY-HM360EC_LCD_Monitor_Adjust03

Adjusting the Contrast

Use the [LCD Contrast] menu to adjust the contrast of the LCD monitor.

Adjust using [Main Menu] arrowR [LCD/VF] arrowR [LCD Contrast].

Increasing the value increases the contrast. [Setting Values: +10 to -10] (Default value: 0)