You can use this feature to prevent erroneous camera operation.
Operation Lock Feature
While in the Camera mode (when the display screen appears), press and hold the [CANCEL] button for 5 seconds or longer.
The operation lock turns on, and an operation lock icon ( 
) appears on the display screen.
Press the [CANCEL] button again for 5 seconds or longer to turn off the operation lock.
Memo
The operation lock feature is only valid in the Camera mode.
The power turns off and the operation lock is disengaged.
The [CANCEL] button on the LCD monitor section cannot be used to turn on/off (“On/Off”) the operation lock feature.
The following remote operations are possible even when the operation lock feature is turned on (“On”).
Remote operation from the wired remote control connected to the [REMOTE] terminal.
Remote operation of the camera through access via a browser on devices such as a smartphone, tablet terminal, or PC.
Operation lock does not apply to the following buttons and switches.
[POWER ON/OFF] switch
TC [IN/OUT] selection switch
All switches inside the LCD monitor door (however, the operation of the [CH1/CH2] adjustment knob will be locked.)
Zoom Lever at the Grip
Zoom Lever at the Handle
Focus/Zoom Ring
[FOCUS/ZOOM] Operation Switch
[FIX/VAR/OFF] zoom speed switch
Iris Dial
[REC] button (at the top of the handle, on the grip and at the bottom of the lens)
Memo
The operation lock will also not apply to the [REC] button at the bottom of the lens if [Camera Function] 
[User Switch Set] [Front REC] is set to “Rec”.
