Global
Mobile User Guide

Specifications

TOP

Product Name

D-ILA Projector

Model Name

DLA-X9000B, DLA-X7000B, DLA-X5000B/W *1, 2

Display Panel/Size

D-ILA device *3, 4

0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million)

Projection Lens

2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus

Light-source Lamp

265 W ultra-high pressure mercury lamp [product no.: PK-L2615U]
Average lifespan: 4500 hours (“Low” mode)

Screen Size

Approx. 60" to 200" (Aspect ratio of 16:9)

Brightness

1900 lm X9000
1800 lm X7000
1700 lm X5000

Projection Distance

Refer to LINK.

Input Compatibility Signal

Refer to LINK.

Display Resolution

3840 x 2160 pixels *5

Input Terminal

HDMI Input

Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *6

Output Terminal

Trigger Terminal

1 system, phi 3.5 mm DC Power Jack ( TRIGGER )
DC OUT 12 V, 0.1 A

3D synchro

Dedicated terminal for 3D SYNCHRO EMITTER (1 system, mini-DIN 3-pin)

Control Terminal

RS-232C Terminal

1 system, D-sub 9-pin (male) (external control)

LAN Terminal

1 system, RJ-45 plug

Power Requirements

AC 100 V to 240 V, 50 Hz/60 Hz

Power Consumption

380 W (during networked standby: 1.5 W *7, during standby: 0.4 W *8)

Operation Environment

Temperature: 5 degree C to 35 degree C; humidity: 20% to 80%; storage temperature: -10 degree C to 60 degree C

Installation Height

Below 5,000 ft (1524 m)

Dimensions (Width x Height x Depth)

Approx. 455 mm x 179 mm x 472 mm (excluding feet and protrusions)

Mass

15.6 k g ( X9000   X7000 )
15.4 k g ( X5000 )

Accessories

Refer to LINK.

“W” indicates that the main unit is white in color. “B” indicates that the main unit is black in color.

E model only in the case of DLA-X5000W.

D-ILA is the abbreviation for Direct drive Image Light Amplifier.

D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit.

During 3D playback, the pixel is set to 1920 x 1080.

HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications.

The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W.

“During standby” refers to Eco Mode standby (LINK).

Design and specifications are subject to change without prior notice.

Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.

Logo_THX_3D_Display 2

For X9000   X7000 , a “THX 3D Display Certification” by THX has been obtained.
In addition to 2D movies, you can also enjoy faithful reproduction of images in a “quality as intended by the filmmaker” during playback of 3D movies.

The THX 3D certification is “an indication of high definition and high resolution”, which is granted to products that have cleared more than 400 image quality tests.

 

Logo_isf

X9000   X7000 are isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.

For more details, please refer to the isf website.

Global
Mobile User Guide
DLA-X9000 / DLA-X7000 / DLA-X5000
Mobile User Guide