User manual

WIRELESS SPORT HEADPHONES

HA-ET45T

Must read

LEGAL INFORMATION

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding Radio and RoHS.
European representative of JVC KENWOOD Corporation is:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY

Recycle mark

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

This product contains rechargeable battery. Contact JVC authorised dealer for disposal.

European Union only

A copy of the Declaration of Conformity with regard to the RE Directive 2014/53/EU can be downloaded from the following Web sites (http://www.jvc.co.jp/ecdoc/).

Hereby, JVC declares that this System [HA-ET45T] is in compliance with the essential requirements and other relevant provision of Directive 2014/53/EU.

CE mark

SAFETY INSTRUCTIONS (for UK)

SAFETY INSTRUCTIONS (for UK)

Manufacturer

JVCKENWOOD Corporation
3-12,Moriya-cho,Kanagawa-ku,Yokohama-shi, Kanagawa, 221-0022, JAPAN

WARNING

Safety Ear

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Do not listen at high volume for an extended period. Do not use while driving or cycling.

Pay special attention to traffic around you when using the headphones outside. Failure to do so could result in an accident.

This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire or the like.

This product contains rechargeable battery, which is not replaceable. Danger of explosion if user replaced battery. Do not replace battery user own self.

Warnings for battery

Please do not handle the battery in the following manners.

It can lead to an explosion or leakage of flammable liquids and gases.

Dispose in fire, discard, crush or cut

Leave in extremely high temperature environment

Leave in extremely low pressure environment

CAUTION

To reduce the risk of electrical shocks, fire, etc.

Do not disassemble or modify the unit.

Do not allow flammable, water or metallic objects to enter the unit.

For your safety...

If ear piece, ear fins or other parts of headphones become lodged in your ear, be careful not to push it deep into the ear canal and seek skilled medical assistance to remove the piece. Damage to the ear may be caused by non-professionals attempting to remove the piece.

Store the ear pieces and ear fins in a safe place where children cannot reach them to avoid the risk of a possible accident or hazard such as swallowing them.

In dryer air conditions such as in winter, you may feel some static shock when using the headphones.

Attach the ear pieces and ear fins firmly when replacing them; failure to do so may result in the ear pieces or ear fins getting lodged in your ear canal when removed, thus becoming a possible health hazard.

Precautions for use

For replacement of the ear pieces and ear fins, please consult your local dealer.

These headphones have a built-in magnet. Do not bring them near objects that may be affected by magnets such as watches, magnetic tape and magnetic cards.

If the earphones or the charging case is dirty, wipe the surface with a dry cloth.

If the charging terminals are dirty, clean the terminals with a cotton swab and the like.

About water-resistant/dust-resistant...

Although these headphones have water-resistant and dust-resistant features (IPX5 and IP5X), it is not completely water proof.

When rinsing, use tap water. Do not use shampoo or soapy water.

Not to be immersed or come into continuous contact with water.

Make sure that the earphone unit is free of dust and not wet before charging.

The charging case is neither drip-proof nor water-resistant. Pay careful attention to avoid contact with water or sweat as this may cause malfunction.

LEGAL INFORMATION

IC:23340-ET45T
FCC ID:2ADZH-ET45T

For U.S.A.

Supplier's Declaration of Conformity

Model Number : HA-ET45T
Trade Name : JVC
Responsible party : JVCKENWOOD USA Corporation
Address: 500 Valley Road,Suite 203 Wayne, NJ 07470
Telephone Number: 973-317-5000
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.

Safety Recycle

ATTENTION:

The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

For Canada

CAN ICES-3 (B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. HA-ET45T has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

WARNING

Hearing Comfort and Well-Being

Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or discontinue use.

Traffic Safety

Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

You should use extreme caution or temporarily discontinue use in potentially hazardous situations.

Do not turn up the volume so high that you cannot hear sound around you.

CAUTION

To reduce the risk of electrical shocks, fire, etc.

Do not disassemble or modify the unit.

Do not allow flammable, water or metallic objects to enter the unit.

For your safety...

If ear piece, ear fins or other parts of headphones become lodged in your ear, be careful not to push it deep into the ear canal and seek skilled medical assistance to remove the piece. Damage to the ear may be caused by non-professionals attempting to remove the piece.

Store the ear pieces and ear fins in a safe place where children cannot reach them to avoid the risk of a possible accident or hazard such as swallowing them.

In dryer air conditions such as in winter, you may feel some static shock when using the headphones.

Attach the ear pieces and ear fins firmly when replacing them; failure to do so may result in the ear pieces or ear fins getting lodged in your ear canal when removed, thus becoming a possible health hazard.

Precautions for use

For replacement of the ear pieces and ear fins, please consult your local dealer.

These headphones have a built-in magnet. Do not bring them near objects that may be affected by magnets such as watches, magnetic tape and magnetic cards.

If the earphones or the charging case is dirty, wipe the surface with a dry cloth.

If the charging terminals are dirty, clean the terminals with a cotton swab and the like.

About water-resistant/dust-resistant...

Although these headphones have water-resistant and dust-resistant features (IPX5 and IP5X), it is not completely water proof.

When rinsing, use tap water. Do not use shampoo or soapy water.

Not to be immersed or come into continuous contact with water.

Make sure that the earphone unit is free of dust and not wet before charging.

The charging case is neither drip-proof nor water-resistant. Pay careful attention to avoid contact with water or sweat as this may cause malfunction.


Guarantee / Warranty

For Europe

Please refer to the following for information on the European Guarantee.

For U.S.A. and Canada

Please refer to warranty information attached on your product.