Inserting an SD Card

When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.

Open the terminal cover.

C4B5 SD Card in 02

Close the LCD monitor to turn off this unit.

Insert an SD card.

C4B5 SD Card in 03

Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.

Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.

Do not touch the metal contact area when inserting the SD card.

Memo

When “SEAMLESS RECORDING” is set to “ON”, recordings can still be made to the SD card without stopping when the remaining recording time on the built-in memory runs out.

Both videos and still images can be recorded on one SD card. It is recommended to confirm the video operation of the SD card before usage.

To record to an SD card, it is necessary to set the recording media to “SD CARD”.

To use a new SD card, or SD card used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from media settings.

Removing the Card

Push the SD card inward once, then pull it out straight.

C4B5 SD Card Out