Video Set Item

Display On TV

For setting whether to display the display and menu characters on the external monitor.

[Setting Values: On, REC button Off]

HDMI/SDI Out

For setting the terminal to output the video.

[Setting Values: HDMI+SDI, SDI, HDMI, REC button Off]

Resolution

For selecting the resolution of video output from the [HDMI] terminal or [SDI OUT] terminal according to the monitor to be connected.

[Setting Values: 576i, 576p, 480i, 480p, 720p, 1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]

Memo

The selectable options vary according to the setting in [System]/[ SlotA_B Resolution] and [ SlotA_B Frame Rate] of [System] arrowR [Record Set] arrowR [Record Format].

Cross conversion output is not possible.

This item cannot be specified when HDMI/SDI Out is set to “Off”.

HDMI Color

For setting the color format of HDMI signals.

This item is selectable when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.

[Setting Values: RGB, REC button Auto]

HDMI Enhance

For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.

This item is selectable when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.

[Setting Values: On, REC button Off]

SDI Rec Trigger

For setting whether to superimpose trigger signals in tandem with the [SDI OUT] terminal as well as the [REC] button on the camera body.
If “On” is specified, it is possible to record on a device equipped with SDI record trigger in tandem with the operation of the [REC] button.
When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.
The SDI record trigger output status to the connected device is indicated by REC  arrowR /STBY  arrowR on the display screen.

[Setting Values: On, REC button Off]

Memo

Even if REC  arrowR /STBY arrowR is displayed on the display screen, the compatible device may not necessarily be recording.

SD Aspect

For setting the style of displaying images with a 16:9 aspect ratio on a 4:3 aspect ratio screen.

Letter:
Displays as a wide image with the top and bottom blackened.

Squeeze:
Displays image that is squeezed horizontally.

[Setting Values: Letter, REC button Squeeze]

Memo

When [Record Format] arrowR [System] is set to “SD”, and [Record Format] arrowR [SD Aspect] is set to “4:3”, “---” is displayed and selection is disabled.

System

SD Set Up

For selecting whether to add a setup signal to the video signal output from the [AV] output terminal.
Setup signals are added when “7.5%” is selected.

[Setting Values: 7.5%, 0.0%]

(Default values: 7.5% (U model), fixed at “0.0%” (E model))

Memo

Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.