For setting the color temperature when the [WHT BAL] switch is set to “PRESET”.
White Balance Item
Preset Temp.
For details, refer to “Adjusting the White Balance ”.
Alternative Temp.
For setting the alternative color temperature in the Preset mode.
When the [WHT BAL] switch is set to “PRESET”, pressing the [ 
] button each time switches the color temperature setting in the Preset mode. ([Preset Temp.] 
[Alternative Temp.])
For details, refer to “Adjusting the White Balance ”.
AWB Paint
For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode.
For details, refer to “Adjusting the White Balance ”.
Increase the number:
Strengthens the red/blue.
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 ( 
0)]
Memo
This item is selectable when the [WHT BAL] switch on the right of the camera recorder is set to “A” or “B”. When “PRESET” is set, this item appears as “---” and cannot be selected.
Different values can be specified for “A” and “B”.
After the [ ] (Auto White Balance) button is pressed to readjust the white balance while [Clear Paint After AWB] is set to “On”, R and B values switch automatically to “0”.
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance).
On:
Sets the [AWB Paint] (R value and B value) settings to “0” after executing AWB (Auto White Balance).
Off:
Does not change the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance).
[Setting Values: On, Off]
FAW Paint
For adjusting the R (red)/B (blue) component during FAW (Full Auto White Balance) mode.
Increase the number:
Strengthens the red/blue.
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 ( 0)]
