For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.
Shooting Assist Item
Focus Assist
[Setting Values: On, 
Off]
Ring
For setting the focus/zoom ring operation.
SW Set:
This follows the settings of the [FOCUS/ZOOM] operation switch.
Focus:
When the Focus Assist function is activated, focusing operation is possible regardless of the settings of the [FOCUS/ZOOM] operation switch.
[Setting Values: SW Set, Focus]
Color
For setting the display color of the focused area when Focus Assist is activated.
[Setting Values: Blue, Green, Red]
Zebra
For selecting whether to display zebra patterns at the bright areas of the subject.
Select “On” to display zebra patterns or “Off” to hide.
[Setting Values: On, Off]
Top
For setting the maximum luminance level for the zebra pattern display.
[Setting Values: Over, 100%, 98%, 95% to 5% (in 5% increments)] ( 80%)
Bottom
For setting the minimum luminance level for the zebra pattern display.
[Setting Values: 100%, 98%, 95% to 0% (in 5% increments)] ( 70%)
Memo
The relation between Top and Bottom is such that Top>Bottom always holds. To maintain this relation during setting, the setting value is automatically corrected.
Focus Assist & Zebra
For selecting the operation when [Focus Assist] and [Zebra] are used simultaneously.
Standard: The focus assist outlines will overlapped the zebra pattern.
ALT: The focus assist outlines will not overlapped the zebra pattern, however, flicker may occur on the zebra area.
[Setting Values: Standard, ALT]
