Connecting to Network via [HOST] Terminal (USB)

Configure the connection settings with [Wizard].

Select “USB” in [Network] arrowR [Connection Setup] arrowR [Wizard], and configure the settings according to the instructions on the screen.

Configure the settings for the following according to the type of connection.

USB wireless LAN connection

Mode of connection

Configuration method

For P2P connections, it is necessary to configure the [Default Gateway] and [Passphrase] according to the steps below after the above settings are configured.

Configure [Network] arrowR [Connection Setup] arrowR [Default Gateway] to “USB/Int. WLAN” 900CHU 900CHE or “USB” 900STU 900RCHE
Set the camera recorder to the Camera mode, and display the status screen ([USB/Int. WLAN] screen 900CHU 900CHE or [USB] screen 900STU 900RCHE ).

Press the [STATUS/SET] button on the camera recorder to display the status screen.
Press the cross-shaped button ( L_botton R_botton ) to display the [USB/Int. WLAN] screen 900CHU 900CHE or [USB] screen 900STU 900RCHE .

Check to ensure that the [SSID] and [Passphrase] that you have set in the wizard are displayed.

Select an SSID from the list of access points (smartphone, tablet terminal, PC, etc.) and enter a passphrase.

Display the list of access points in the wireless connection settings of the smartphone, tablet terminal, or PC, and select “HC900-****”. (**** are numbers that vary with the device used.)

After the password confirmation screen appears, enter the [Passphrase] displayed on the [USB/Int. WLAN] screen 900CHU 900CHE or [USB] screen 900STU 900RCHE .

USB wired LAN connection

IP address setting (DHCP or manual)

IP Address

Subnet mask

Default gateway

DNS Server

Memo

When an address is manually assigned in a NAT environment, it is also necessary to set the default gateway correctly besides conversion of the address at the router’s end in order to perform operations such as access to the Internet from an external network via the router.

USB cellular adapter connection

Connection phone number

Username

Password

Caution

You can access the web functions via a web browser on devices such as a smartphone, tablet terminal, or PC only in a LAN environment.

Note that you may have to pay very high bills in the case of pay-per-use contracts. Fixed price contract is recommended if you are using the network function.

Note that the use of improper settings may result in expensive bills from the phone service provider. Make sure that the setting is correct.

To avoid expensive bills due to the roaming connection, you are recommended to use this function by disabling the roaming contract.

There may be communication even when you are not using the network function. Remove the cellular adapter when the function is not in use.

Setting is complete.

After setting is complete, you can access the camera recorder via a web browser.

Memo

After setting is complete, the following items will be automatically configured.

The [Network] arrowR [Connection Setup] arrowR [USB/Int. WLAN] setting changes to “On”. 900CHU 900CHE

The setting of [Network] arrowR [Connection Setup] arrowR [Default Gateway] changes to “USB/Int. WLAN” 900CHU 900CHE or “USB” 900STU 900RCHE . However, this does not apply to the P2P connection.

The setting of [Network] arrowR [Live Streaming] arrowR [Interface] changes to “USB/Int. WLAN” 900CHU 900CHE or “USB” 900STU 900RCHE .