This screen is used to configure overlay settings.
Images can be overlaid onto recorded video and live stream video.
Overlay Settings Menu
Overlay Function
For specifying whether to activate the overlay function.
[Setting Values: Enable, 
Disable]
Memo
The setting cannot be changed during recording, streaming or Return over IP.
When [System] is configured to a setting other than “HD” and “HD+Web”, this item is fixed at “Disable”.
When [Slot Mode] is set to “Backup 
”, this item is fixed at “Disable”.
When “Disable” is selected, settings of the overlay function cannot be changed.
Layout
For selecting a SDP file.
Memo
Create a SDP file using SDP Generator in Windows or Mac before recording.
Import User Layout
Load the SDP file that is created by using SDP Generator onto this camera recorder.
Memo
Maximum 4 files can be saved in this camera recorder.
The SDP file may not be saved depending on the available memory capacity of the camera recorder.
Delete User Layout
For deleting the SDP file.
Memo
The SDP file is not deleted by selecting [System] 
[Reset All]. Delete the file from the camera recorder.
Type
By selecting [Type], overlay images can be displayed.
[Setting values: Broadcast, None]
Output
For specifying overlay output settings.
REC
For setting whether to record overlay images together with the recorded video into an SD card.
On:
Saves the video with overlay images into an SD card.
Off:
Overlay images are not recorded into an SD card.
[Setting Values: On, Off]
Memo
Displays overlay images on the recording in slot B when [System] is configured to “HD+Web”.
When the setting is configured to “Off”, live streaming is limited to a maximum bit rate of 12 Mbps.
SDI OUT2
For setting whether to display overlay images on SDI OUT2 output.
On:
Displays overlay images on streaming videos and SDI OUT2 output.
Off:
Displays overlay images only on streaming videos.
[Setting values: On, Off]
HDMI OUT
For setting whether to display overlay images on HDMI output.
On:
Displays overlay images on streaming videos and HDMI output.
Off:
Displays overlay images only on streaming videos.
[Setting Values: On, Off]
VIDEO OUT
For setting whether to display overlay images on VIDEO OUT output.
On:
Displays overlay images on streaming videos and VIDEO OUT output.
Off:
Displays overlay images only on streaming videos.
[Setting values: On, Off]
Live Streaming (Fixed)
Displays overlay images on live streaming videos. Setting is fixed at “On” and cannot be changed.
Watermark
Inserting watermarks (digital watermark) on recorded videos protects the content of your work.
On:
Displays watermark.
Off:
Does not display watermark.
[Setting Values: On, Off]
Memo
It can be displayed when the SDP file for which “Watermark” is preconfigured is selected in [Layout].
Position
The display position of the watermark can be changed by using the cross-shaped button.
Full Screen Graphic
Images can be displayed across the whole screen.
Status
For displaying the number of images saved in this camera recorder and the memory capacity used.
Import Graphic 
/ 
For reading the images to be used in Full Screen Graphic from an SD card.
Memo
JPEG and PNG formats are supported.
Enter not more than 31 characters for the file name.
Delete Graphic
For deleting all images saved in this camera recorder.
Password Lock
The Overlay Settings menu can be locked with a password.
On:
A password is required to open the Overlay Settings menu.
Off:
Opens the Overlay Settings menu without a password.
[Setting Values: On, Off]
Caution
Do not forget the password that you have set. If the password is lost or forgotten, you cannot deactivate the password protection function.
