Video Set Item

SDI OUT1

For configuring video output from the [HD/SD SDI OUT1] terminal.

[Setting Values: On, Off]

Memo

When a resolution with no SDI output is selected, the setting is fixed at “Off”.

This item needs to be configured to “On” even during SDI OUT1 output from the expansion unit terminal (68-pin) at the back.

Resolution (SDI OUT1)

For selecting the resolution of video output from the [HD/SD SDI OUT1] terminal according to the monitor to be connected.

[Setting Values: 1080psF, 1080p, 1080i, 720p, 576i, 480i]

Memo

The selectable options vary according to the setting in [System]/[ SlotA_B Resolution] and [ SlotA_B Frame Rate] of [System] arrowR [Record Set] arrowR [Record Format].

Cross conversion output is not possible.

When [A/V Set] arrowR [Video Set] arrowR [SDI OUT1] arrowR [Resolution] is set to “1080p”, configuring [System] arrowR [GPS] to “On” changes the setting to “1080i”. 900CHU 900CHE

SDI OUT2

For configuring video output from the [HD/SD SDI OUT2] terminal.

VF:
Outputs the same display as that of the viewfinder.

Camera:
Outputs from the terminal. The screen and menu displays can be configured in [SDI OUT2] [Character].

Return Video:
Outputs the return video in 1080p :

Off:
Does not output from the terminal.

[Setting Values: VF, Camera, Return Video, Off]

Memo

When a resolution with no SDI output is selected, “Camera” cannot be selected.

When [System] is set to “HD(SDI In)” or “SD(SDI In)”, “Return Video” cannot be selected.

When “Return Video” is selected

PinP display on the LCD is disabled.

Audio is not output.

Character (SDI OUT2)

For configuring whether to show the display and menu on the [HD/SD SDI OUT2] terminal.

[Setting Values: On, Off]

Memo

When “VF” is selected for [SDI OUT2], the setting is fixed at “On”.

When “Return Video” is selected for [SDI OUT2], the setting is fixed at “Off”.

When [Overlay Settings] arrowR [Overlay Function] is set to “Enable”

The setting is fixed at “Off” when [Overlay Settings] arrowR [Output] arrowR [SDI OUT2] is configured to “Off”

The setting is fixed at “Off” when [Overlay Settings] arrowR [Output] arrowR [SDI OUT2] is configured to “On” and [Resolution] configured to “480i”

Resolution (SDI OUT2)

For selecting the resolution of video output from the [HD/SD SDI OUT2] terminal according to the monitor to be connected.

[Setting Values: 1080psF/i, 1080p, 1080i, 720p, 576i, 480i]

Memo

The selectable options vary according to the setting in [System]/[ SlotA_B Resolution] and [ SlotA_B Frame Rate] of [System] arrowR [Record Set] arrowR [Record Format].

Cross conversion output is not possible.

When “Return Video” is selected for [SDI OUT2], signal is output from the [HD/SD SDI OUT 2] terminal at 1080p.

3G-SDI Mapping

For configuring the mode of mapping for signals output from the [HD/SD SDI OUT] terminal.

[Setting Values: Level B, Level A]

Memo

This item can be configured only when [SDI OUT1] arrowR [Resolution] or [SDI OUT2] arrowR [Resolution] is set to “1080p”.

When [SDI OUT1] or [SDI OUT2] is configured to “Off”, this item cannot be configured.

SDI Rec Trigger

For configuring whether to superimpose trigger signals on the [HD/SD SDI OUT] terminal in tandem with the [REC] button.

If “Type-A” or “Type-B” is specified, it is possible to record on a device equipped with SDI record trigger in tandem with the operation of the [REC] button.

When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.

The SDI record trigger output status to the connected device is indicated by REC /STBY on the display screen.

[Setting Values: Type-A, Type-B, Off]

Memo

If “Type-A” does not work, it may operate in the “Type-B” setting, but the user’s bit to the connected device will not be correctly output.

Even if REC arrowR /STBY arrowR is displayed on the display screen, the compatible device may not necessarily be recording.

This item can be configured when [SDI OUT1] is set to “On” or [SDI OUT2] is set to a setting other than “Off”, and [Rec Mode] is set to “Normal”, “Pre Rec” or “Clip Continuous”.

Set to “Off” if connecting to a device that does not support record trigger.

HDMI OUT

For configuring video output from the [HDMI] terminal.

VF:
Outputs the same display as that of the viewfinder.

Camera:
Outputs from the terminal. The screen and menu displays can be configured in [HDMI OUT] [Character].

Return Video:
Outputs the return video in 1080p :

Off:
Does not output from the terminal.

[Setting Values: VF, Camera, Return Video, Off]

Memo

When a resolution with no HDMI output is selected, “Camera” cannot be selected.

When [System] is set to “HD(SDI In)” or “SD(SDI In)”, “Return Video” cannot be selected.

When “Return Video” is selected

PinP display on the LCD is disabled.

Audio is not output.

Character (HDMI OUT)

For configuring whether to show the display and menu on the [HDMI] terminal.

[Setting Values: On, Off]

Memo

When “VF” is selected for [HDMI OUT], the setting is fixed at “On”.

Resolution (HDMI OUT)

For selecting the resolution of video output from the [HDMI] terminal according to the monitor to be connected.

[Setting Values: 1080psF/i, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i]

Memo

The selectable options vary according to the setting in [System]/[ SlotA_B Resolution] and [ SlotA_B Frame Rate] of [System] arrowR [Record Set] arrowR [Record Format].

Cross conversion output is not possible.

When “Return Video” is selected for [HDMI OUT], signal is output from the [HDMI] terminal at 1080p.

Color

For setting the color format of HDMI signals.

[Setting Values: RGB, Auto]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Colorimetry

For configuring the colorimetry of the HDMI signal when [Camera Process] [Color Space] [Colorimetry] is set to “ITU2020”.

ITU2020:
Outputs using the colorimetry of ITU2020 regardless of the device that is connected via HDMI.

ITU709:
Outputs using the colorimetry of ITU709 regardless of the device that is connected via HDMI.

Auto:
Switches the colorimetry automatically according to the device that is connected via HDMI.

[Setting Values: ITU2020, ITU709, Auto]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

This item can be configured when [HDMI Color] is set to “Auto”.

This item cannot be configured when [Camera Process] arrowR [Color Space] arrowR [Colorimetry] is set to a setting other than “ITU2020”.

Enhance

For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.

[Setting Values: On, Off]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Rec Trigger

For configuring whether to superimpose trigger signals on the [HDMI] out terminal in tandem with the [REC] button.

If “On” is specified, it is possible to record on a device equipped with HDMI record trigger in tandem with the operation of the [REC] button.

When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.

The HDMI record trigger output status to the connected device is indicated by REC /STBY on the display screen.

[Setting Values: On, Off]

Memo

Even if REC arrowR /STBY arrowR is displayed on the display screen, the compatible device may not necessarily be recording.

This item can be configured when [HDMI OUT] is set to a value other than “Off”, and [Rec Mode] is set to “Normal”, “Pre Rec” or “Clip Continuous”.

Set to “Off” if connecting to a device that does not support record trigger.

TC

For setting whether to superimpose time code to the [HDMI] terminal.

[Setting Values: On, Off]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Set to “Off” if connecting to a device that does not support HDMI TC.

VIDEO OUT

For configuring video output from the [VIDEO OUT] terminal.

[Setting Values: On, Off]

Character (VIDEO OUT)

For configuring whether to show the display and menu on the [VIDEO OUT] terminal.

[Setting Values: On, Off]

SD Aspect

For setting the style of displaying images with a 16:9 aspect ratio on a 4:3 aspect ratio screen.

Side Cut:
Displays image with the left and right sides cut off.

Letter:
Displays as a wide image with the top and bottom blackened.

Squeeze:
Displays image that is squeezed horizontally.

[Setting Values: Side Cut, Letter, Squeeze]

Memo

When [Record Format] arrowR [System] is set to “SD”, and [Record Format] arrowR [SD Aspect] is set to “4:3”, “---” is displayed and selection is disabled.

System

[System] arrowR [Record Set] arrowR [Record Format] arrowR [System] is set to “SD”, “Squeeze” and “Letter” can be selected.

SD Set Up

For selecting whether to add a setup signal to the video signal output from the [VIDEO OUT] terminal.
Setup signals are added when “7.5%” is selected.

[Setting Values: 7.5%, 0.0%]

Memo

Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.

When [System] arrowR [Record Set] arrowR [Record Format] arrowR [Frame Rate] is set to “50p” or “50i”, “---” is displayed and selection is disabled.

Genlock Input

For selecting the input destination of video synchronizing signals.

SDI IN:
Inputs video synchronizing signals from the [HD/SD SDI IN] terminal.

Adapter:
Inputs video synchronizing signals from the adapter connected to the accessory connection terminal (68 pins) on the rear of the camera recorder.

GENLOCK:
Inputs video synchronizing signals from the [GENLOCK] terminal.

[Setting Values: SDI IN, Adapter, GENLOCK]

Memo

When “HD(SDI In)” or “SD(SDI In)” is selected in [System], “SDI IN” is displayed and selection is disabled.

Genlock Adjust...

Adjusts the H Phase of the camera recorder’s video signals with respect to the input synchronizing signals.

SD-SDI H Phase

Adjusts the H Phase of the camera recorder’s SD-SDI signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.

[Setting Values: -373 to +373] ( 0)

Memo

When there is no SD video output from the [SDI OUT] terminal, “---” is displayed and selection is disabled.

HD-SDI H Phase

Adjusts the H Phase of the camera recorder’s HD-SDI signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.

[Setting Values: -1024 to +1023] ( 0)

Memo

When there is no HD video output from the [SDI OUT] terminal, “---” is displayed and selection is disabled.

Return Input

For selecting the input destination of the return video.

Network:
For inputting the return video from the preconfigured network.

SDI:
Inputs return video from the [HD/SD SDI IN] terminal.

[Setting Values: Network, SDI]

Return Aspect

For selecting the aspect ratio of the return video.

16:9:
Select this option if the return video is a squeeze signal.

4:3:
Select this option if the return video is a 4:3 aspect signal (including Letter Box).

[Setting Values: 16:9, 4:3]