You can connect a device such as a smartphone, tablet terminal, or PC directly to the camera recorder using a cross cable to access the camera recorder’s web functions. Alternatively, you can also connect using an Ethernet hub.
Connecting to Network via [LAN] Terminal
Configure the connection settings with [Wizard].
Select “LAN” in [Network] 
[Connection Setup] [Wizard], and configure the settings according to the instructions on the screen.
Perform setting for the following.
IP address setting (DHCP or manual)
IP Address
Subnet mask
Default gateway
DNS Server
Memo
When an address is manually assigned in a NAT environment, it is also necessary to set the default gateway correctly besides conversion of the address at the router’s end in order to perform operations such as access to the Internet from an external network via the router.
Setting is complete.
After setting is complete, you can access the camera recorder via a web browser.
Memo
After setting is complete, the following items will be automatically configured.
The [Network] [Connection Setup] [Default Gateway] setting changes to “LAN”.
The [Network] [Live Streaming] [Interface] setting changes to “LAN”.
