The camera recorder starts up in Camera mode and is ready for shooting.
Turning On/Off the Power
Turning On the Power
Set the [POWER ON/OFF] switch to “ON”.
Memo
The camera recorder always start up in Camera mode when the [POWER ON/OFF] switch is set to “ON”. Use the [CAM/MEDIA] button at the side of the camera recorder to switch mode.
Turning Off the Power
Sets the camera recorder to the recording standby or stop mode.
Set the [POWER ON/OFF] switch to “OFF”.
Remove the battery and the power to the [DC INPUT] terminal (when not in use for a long time).
Caution
Do not set the [POWER ON/OFF] switch to “OFF” during recording. Check that the operation mode display is “STBY” or “STOP” before you turn off the power.
If you have mistakenly set the [POWER ON/OFF] switch to “OFF” during recording, wait for 5 seconds or more before you turn on the power again.
When turning off the power, first set the [POWER ON/OFF] switch of the camera recorder to “OFF”. Do not remove the battery or turn off the AC power while the [POWER ON/OFF] switch is set to “ON”.
