A variety of wired and wireless interfaces to support various network connections
In addition to the USB host terminal for wireless LAN and LTE USB adapter connections, this camera recorder is equipped with a variety of interfaces such as wired LAN terminal and built-in wireless LAN with 2.4GHz/5GHz MIMO dual band antennas
to support various network connections.
Three full HD 2/3-inch CMOS image sensors for high sensitivity of F12, low noise high quality recording
This camera recorder is equipped with three 2/3-inch 2.20M pixels full HD CMOS image sensors.
It delivers high sensitivity of F12, low noise high quality recordings.
2/3-inch B4 lens mount system equipped with B4 lens mount and 4-position optical ND filter
This camera recorder comes with a 2/3-inch B4 lens mount system equipped with B4 lens mount and 4-position optical ND filter.
A wide range of B4 mount lenses can be used. Furthermore, when a B4 lens with chromatic aberration compensation data is installed, chromatic aberration can be corrected on the camera recorder.
By switching the 4-position ND filter (CLEAR, 1/4, 1/16, 1/64), the amount of light can be adjusted according to the brightness during shooting.
High quality signal processing by 10-bit, 4:2:2 sampling
High quality signal processing that delivers rich gradation expression and color reproduction of video signals is possible by means of 10-bit, 4:2:2 sampling.
Various usage-based recording formats
The recording codec supports two types of formats that are compatible with the 4:2:2 10-bit formats widely used by broadcasting stations, namely MPEG-4 AVC/H.264 and MPEG-2. All file formats are compatible with QuickTime (MOV).
Newly developed user multi-matrix for 16-axis color correction
In addition to the conventional 6-axis user linear matrix adjustment, this camera recorder is equipped with user multi-matrix that enables accurate adjustment of hue and saturation in the smaller 16-axis color region.
HDR and log gamma for high dynamic range and high color gamut
This camera recorder is equipped with HLG (Hybrid Log-Gamma) that conforms to ITU-BT.2100 and our in-house J-Log1 Gamma with 800% dynamic range to cope with HDR (High Dynamic Range). Capable of recording in 10-bit for high dynamic range and high color gamut.
Double SD card slots for series/dual recordings
The most common SDHC/SDXC card recording system is used for the memory card. This ensures high reliability and operation at low running cost.
Various user friendly recording options are available. These include series recording which enables seamless long hour continuous recordings over the slots and dual recording of the same file to two slots.
3.26-inch OLED electronic viewfinder and 3.5-inch LCD monitor (with focus assist function)
This camera recorder supports focusing through the 3.26-inch OLED electronic viewfinder and 3.5-inch LCD monitor. Other assist functions are also available, including magnified focus on a manually selected point.
Time code input/output and genlock terminals for shooting using multiple cameras
This camera recorder supports the use of multiple cameras as well as studio use.
Professional-style switch layout and diverse video parameters
Switches for Gain and White Balance are available on the side panel to enable quick switching according to the shooting scene. Image quality parameters such as gamma and color matrix are also available in the menu for adjustment to the preferred tones.
Built-in GPS
This camera recorder is built in with GPS function, which enables the positional information obtained from the GPS satellite during a shoot to be recorded as metadata.
Note that acquisition of the positional information may fail depending on the weather condition.
User buttons/switches assignable with different functions for greater ease of use
Menu items corresponding to each user button are available to assign the buttons with different functions.
“IPX2” standard equivalent waterproof function for shooting in the rain
SDI pool feed for simultaneous recording and streaming of videos