Battery Warning Settings

Follow the steps below to configure the warning voltage or warning level when the remaining battery level is running low.

Select “Voltage” or “Capacity%” in [System] arrowR [Battery] arrowR [Type]

“Near End (V)” and “End (V)” are enabled when “Voltage” is selected.

“Near End (%)” and “End (%)” are enabled when “Capacity%” is selected.

Configure “Near End” and “End”

Configures the setting at which the power is shut down automatically after the warning is activated.

Near End (V)
End (V)
Near End (%)
End (%)
Check in advance to ensure that the connected battery is in order and the settings are appropriate

If the time is different from what has been anticipated, repeat the steps in 2 and 3.

Memo

When the battery that is connected does not support communication, “Near End (V)” and “End (%)” are enabled even when “Capacity%” is selected.