For configuring the method for uploading to the FTP server.
Upload Settings Item
Upload
Auto:
Select this option for automatic FTP transfer. FTP transfer starts when [Auto Upload] is configured to “On”.
Manual:
Select this option for manual FTP transfer from the Media mode.
[Setting Values: 
Auto, Manual]
Auto Upload
When [Upload] is configured to “Auto”, FTP transfer starts automatically when the setting is configured to “On”.
[Setting Values: On, Off]
Memo
This is fixed at “Off” when [System] is set to “High-Speed”.
Configuring [Auto Upload] to “On” disables configuration of all the settings under the Upload Settings item.
Slot
For selecting the recording media slot to enable automatic upload.
[Setting Values: A, B]
Memo
This is fixed at “EXT” when [System] is set to “4K EXT (SSD)”.
Division
Automatically splits the clips and performs FTP transfer during recording at the preconfigured time when [System] is configured to “HD+Web”.
[Setting Values: Off, 15 sec, 30 sec, 45 sec, 60 sec, 90 sec, 3 min, 5 min, 10 min, 15 min]
Memo
[Slot] is fixed at “B”.
Cellular
For configuring whether to enable connection via a USB cellular adapter.
[Setting Values: Enable, Disable]
Server
For configuring the server for uploading to the FTP server.
[Setting Values: Clip-FTP1, Clip-FTP2, Clip-FTP3, Clip-FTP4]
Clip Server
Clip-FTP1, Clip-FTP2, Clip-FTP3, Clip-FTP4
The name that is set in [Alias] is displayed individually.
Alias
For setting a name to distinguish the settings of this camera.
The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
ZIXI:
Enables stable transmission by reducing jitter and packet loss significantly through communicating via a relay server.
[Setting Values: FTP, SFTP, FTPS, FTPES, ZIXI] 
[Setting Values: FTP, SFTP, FTPS, FTPES] 
Memo
To use the “ZIXI” setting, a dedicated server is needed separately.
If “ZIXI” is set, the resume function is enabled.
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI: 2088)
Dir. Path
Enter the path name for the directory to upload to (“/pub”, “/home/user”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Stream ID
For configuring the stream ID that is registered at the distribution destination.
The default value varies with the product model.
Enter not more than 63 characters.
Memo
This item is selectable only when [Type] is set to “ZIXI”.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters. Enter not more than 127 characters for ZIXI setting.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
Memo
When [Protocol] is configured to “SFTP” or “ZIXI”, this item appears as “---” and cannot be selected.
