Metadata Server Item

Meta-FTP1, Meta-FTP2, Meta-FTP3, Meta-FTP4

The name that is set in [Alias] is displayed individually.

Alias

For setting a name to distinguish the settings of this camera.
The name set in this item will be displayed in the [Import Metadata] options.

Enter not more than 31 characters.

Protocol

For setting the protocol of the FTP server to be connected.

FTP:
Protocol that does not encrypt the incoming and outgoing data.

SFTP:
Protocol that encrypts incoming and outgoing data using SSH.

FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).

FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).

[Setting Values: REC button FTP, SFTP, FTPS, FTPES]

Server

For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.

Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].

Port

Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)

File Path

Enter the path name for the metadata file (“/pub/meta.xml”, “/home/user/meta2.xml”, etc.)

Enter not more than 127 characters.

Username

Enter the user name for connecting to the FTP server.

Enter not more than 31 characters.

Password

Enter the password for connecting to the FTP server.

Enter not more than 31 characters.

PASV Mode

For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.

[Setting Values: On, REC button Off]

Memo

When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.