Return over IP Item

Function 550

For configuring the Return over IP function to Enable or Disable when in the QuickTime(MPEG2) or MXF(MPEG2) mode.

[Setting Values: Enable, REC button Disable]

Memo

Configure this item when “QuickTime(MPEG2)” or “MXF(MPEG2)” is selected for [System] arrowR [Record Set] arrowR [Record Format] arrowR [ SlotA_B Format]. The live streaming images may turn out different depending on whether this item is configured to “Enable” or “Disable”. It is recommended that this item be configured to “Disable” if only live streaming is to be used.

When this is configured to “Enable” and [Camera Process] arrowR [Color Space] is configured to “J-Log1” or “HLG”, live streaming settings will be as follows.

[Color Space]“ITU709”

[Gamma]“Standard”

[Knee]“Manual”/[Level]“95.0%”

[Color Matrix]“Standard”

Return over IP

For configuring Return over IP to On/Off.

[Setting Values: On, REC button Off]

Memo

The setting is fixed at “Off” in any of the following cases.

[Return over IP] arrowR [Function] is set to “Disable” 550

Recording

[Live Streaming] arrowR [Optional Adapter] is set to “Enable”

Server

For selecting the source server for sending out Return over IP audio/video.

[Setting Values: REC button Server1, Server2, Server3, Server4]

Memo

The setting cannot be changed while Return over IP is operating (when [Return over IP] is set to “On”).

When [Return over IP] arrowR [Function] is configured to “Disable”, this item cannot be changed. 550

Return Server

For configuring the source server for sending out Return over IP audio/video.

Memo

The setting cannot be changed while Return over IP is operating (when [Return over IP] is set to “On”).

Server1, Server2, Server3, Server4

The name that is set in [Alias] is displayed individually.

Alias

For setting a name to distinguish the settings of this camera.
The name set in this item will be displayed in the [Server] options.

The default value is “Server1/Server2/Server3/Server4”.

You can enter up to 31 characters and ASCII characters.

Type

For configuring the system for transferring video and audio to be distributed.

[Setting Values: REC button RTSP/RTP, ZIXI(SRT), Icecast] 550

[Setting Values: REC button RTSP/RTP, SRT, Icecast] 500

Memo

Operates as IFB when the setting is configured to “Icecast”.

Use transmission devices that are compatible with the respective transfer systems.

To use the “ZIXI” setting, a dedicated server is needed separately. 550

The GY-HC550 is a model that is equipped with the Zixi protocol, thus SRT protocol update needs to be performed before using the SRT protocol. Doing so will make the Zixi protocol unusable.
To enable the use of the Zixi protocol again, perform Zixi protocol update.

The following items that can be set vary depending on the setting of this item.

Protocol

For configuring the protocol of the video/audio source server to be connected.

[Setting Values: REC button UDP, TCP]

Memo

This item is selectable only when [Type] is set to “RTSP/RTP”.

Connection Mode

For configuring the SRT connection mode.

[Setting Values: REC button Caller, Listener, Rendezvous]

Memo

This item is selectable only when [Type] is set to “SRT”.

Source Address

For configuring details such as the host name and IP address of the video/audio transmission source.
There is no default value (blank).

A maximum of 191 ASCII characters can be entered when [Type] is configured to a setting other than “SRT”.

A maximum of 191 characters including single-byte alphanumeric characters (a to z, 0 to 9) and single-byte hyphen [-] and dot [.] can be entered when [Type] is configured to “SRT”.

Source Port

Enter the network port number of the video/audio transmission source using an integer between 1 and 65535.

The default value is “554” when [Type] is set to “RTSP/RTP”, “2077” when it is set to “ZIXI”, and “5000” when it is set to Icecast.

Memo

When [Type] is set to “RTSP/RTP”, only even numbers from 2 to 65530 can be specified for the port number.

Port

Enter a SRT port number using an integer between 1 and 65535.
The default value is “6510”.

Memo

This item is selectable only when [Type] is set to “SRT”.

Stream ID

For configuring the stream ID registered on the video/audio transmission source.
There is no default value (blank).

Enter not more than 63 characters.

Memo

This item is available for setting when [Type] is set to “RTSP/RTP” or “ZIXI”.

Username

For setting the user name.
There is no default value (blank).

Enter not more than 63 characters.

Memo

This item is selectable only when [Type] is set to “RTSP/RTP”.

Password

For setting the password.
There is no default value (blank).

You can enter up to 31 characters when [Type] is set to “RTSP/RTP”.

You can enter up to 127 characters when [Type] is set to “ZIXI”.

Memo

This item is available for setting when [Type] is set to “RTSP/RTP” or “ZIXI”.

Name 550

For configuring the name.
The default value is “HC550”.

Enter not more than 31 characters.

Memo

This item is selectable only when [Type] is set to “ZIXI”.

Latency 550

For setting the latency mode.

[Setting Values: Medium, REC button Min, Off]

Memo

This item is selectable only when [Type] is set to “ZIXI”.

Mountpoint

Enter the mountpoint (character string for identifying a stream) for streaming servers that support multiple streams.
There is no default value (blank).

Enter not more than 63 characters.

Memo

This item is selectable only when [Type] is set to “Icecast”.

Latency

Enter the amount of SRT latency using an integer between 20 ms and 8000 ms.
The default value is “20ms”.

Memo

This item is selectable only when [Type] is set to “SRT”.

Encryption

For configuring SRT encryption.

[Setting Values: On, REC button Off]

Memo

This item is selectable only when [Type] is set to “SRT”.

Passphrase

For configuring the SRT passphrase.
There is no default value (blank).
You can enter a passphrase between 10 to 79 characters.

Memo

This item is selectable only when [Type] is set to “SRT”.

This item is selectable when [Encryption] is set to a value other than “Off”.

Resolution (Fixed)

This is fixed at “1280x720”.

Frame Rate

For configuring the frame rate.

When [Record Format] arrowR [Frame Rate] is set to “60p”, “60i” or “30p”

[Setting Values: REC button 60p, 30p]

When [Record Format] arrowR [Frame Rate] is set to “50p”, “50i” or “25p”

[Setting Values: REC button 50p, 25p]

Memo

This item is available for setting when [Type] is set to “RTSP/RTP”, “ZIXI” or “SRT”.