Display Type Item

This menu is used to set the displays on the LCD monitor and viewfinder screen.

Battery

For setting the display of the remaining battery power on the LCD monitor and viewfinder screen.

Time:
Displays the remaining battery power in minutes. (min)

Capacity%:
Displays the remaining battery power in percentage. (%)

Voltage:
Displays the current battery voltage in units of 0.1 V. (V)

[Setting Values: REC button Time, Capacity%, Voltage]

Memo

The battery mark that appears before the “Time”, “Capacity%” or “Voltage” value changes according to the remaining battery power.
In addition, the plug mark is added during charging.

BATT_0B   BATT_0B_C :

10 % and below

BATT_1   BATT_1_C :

11 % to 30 %

BATT_2   BATT_2_C :

31% to 70 %

BATT_3   BATT_3_C :

71 % to 100 %

When the remaining battery power is low, “RES” instead of the value is displayed.
Replace the battery as soon as possible.

The remaining battery power and remaining time are intended as reference values for the shooting duration.

The time, capacity or voltage will not be displayed during charging.

TC/UB

For specifying whether to display the time code (TC) or user’s bit (UB) rate in the display on the LCD monitor and viewfinder screen.

[Setting Values: UB, REC button TC]

Zoom

For setting the display method of the zoom position.

Number:
Displays the zoom position in numbers.

Bar:
Displays the zoom position in a bar.

[Setting Values: Number, REC button Bar]

Focus

For setting the display method of the approximate distance to the subject in focus.

Feet:
Displays the distance in feet.

Meter:
Displays the distance in meters.

[Setting Values: Feet, REC button Meter]

ND Filter

For specifying how the filter position is to be displayed.

Normal + Assist:
Displays the current filter position.
If the ND filter setting is inappropriate, the appropriate ND filter to select will appear blinking.

Normal:
Displays the current filter position.

[Setting Values: Normal + Assist, REC button Normal]

Shutter

For setting the shutter display to be displayed on the LCD monitor and viewfinder screen.

DEG:
Displays the shutter speed in degrees in the same way as film cameras.

SEC:
Displays the shutter speed in seconds.

[Setting Values: DEG, REC button SEC]

Memo

“DEG” is selectable only when [ SlotA_B Frame Rate] is set to “24p” or “25p”.
When [ SlotA_B Frame Rate] is set to other values, the shutter display setting is fixed at “SEC” and cannot be selected.

SlotA_B Frame Rate/ EXT Frame Rate

Gain

For setting the gain display to be displayed on the LCD monitor and viewfinder screen.

ISO:
Displays the gain as ISO sensitivity.

dB:
Displays the gain in dB (decibel).

[Setting Values: ISO, REC button dB]

Memo

This item cannot be configured when [Color Space] is set to “HLG”.