The menu settings can be stored on the camera recorder or an SD card by saving them as a setup file.
Configuring Setup Files
Loading a saved setup file enables you to reproduce the appropriate setup state speedily.
The following types of setup files are available.
Picture File:
File that contains image creation settings in accordance to the shooting conditions ([Camera Process] menu items).
All File:
File that contains all menu settings, ranging from video format settings to image creation settings such as device settings and shooting conditions, as well as the contents of the [Favorites Menu]. Settings in Network Settings are not saved.
User File:
File that contains settings from All File that are not included in the [Camera Process] menu items.
Memo
Make use of the [Setup File] menu to save or load a setup file.
The following operations can be performed on the [Setup File] menu.
Even when [Record Format] 
[System] is configured to “4K EXT (SSD)” or “HD EXT(SSD)”, setup files will be saved to this camera recorder or the SD card.
Number of Storable Setup Files
Camera recorder:
[CAM1] to [CAM4]
SD slot A:
[ 
1 ] to [ 8 ]
SD slot B:
[ 
1 ] to [ 8 ]
Compatibility
User File/All File
Only User File/All File of the GY-HC550 and GY-HC500 series can be loaded.
When User File/All File saved using GY-HC550 are loaded using GY-HC500, the functions that only exist on GY-HC550 are ignored.
Picture File
Only Picture File of the GY-HC550 and GY-HC500 series can be loaded.
