Menu screen for setting time code and user’s bit.
TC/UB Menu
This item cannot be selected in the Media mode, during recording or live streaming.
TC Generator
For setting the operation of the time code.
Free Run (NTP):
Activates NTP synchronization of the time code and superimposing of TC information (metadata) on the streaming data.
Free Run (GPS) 
:
Time code information can be synchronized with the date/time information acquired from the GPS.
Free Run (Ext):
External time code input will be synchronized with this and the time code will be recorded.
Free Run:
The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.
Rec Run:
The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.
Regen:
The time code operates in the run mode during recording. When the SD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order.
[Setting Values: Free Run (NTP), Free Run (GPS) , Free Run (Ext), Free Run, 
Rec Run, Regen]
Memo
When [Rec Mode] is configured to “Interval Rec” or “Frame Rec”, only “Rec Run” and “Regen” are selectable.
When [System] is configured to “High-Speed”, only “Rec Run” and “Regen” are selectable.
When [Frame Rate] is set to “24p”, “Free Run (GPS)” cannot be selected.
Time Zone
For configuring the time zone.
Local Time:
Time code with time zone corrected for time information obtained from NTP
UTC:
Time code without time zone correction
[Setting Values: Local Time, UTC]
Memo
This item can be configured when [TC Generator] is set to “Free Run(NTP)”.
Streaming Format
For configuring the time code system.
[Setting Values: LTC, VITC]
Memo
This item can be configured when [TC Generator] is set to “Free Run (NTP)”.
This is fixed at “VITC” when [Live Streaming] 
[Optional Adapter] is set to “Enable”.
TC Preset
For setting the time code (hour, minute, second, frame).
Display:
Drop setting 02:02:25.20
Display:
Non Drop setting 02:02:25:20
UB Mode
For setting the recording mode of the user’s bit.
Date:
Records the date.
Time:
Records the time.
Preset:
Records according to the preset setting.
[Setting Values: Date, Time, Preset]
Memo
If [UB Mode] is set to “Time”, the user’s bit operates in the 24-hour format even if the LCD display is in the 12-hour format.
Preset
For setting the user’s bit. (Digit by digit)
Display:
AB CD EF 01
Memo
When [UB Mode] is set to “Date” or “Time”, this item appears as “---” and preset is disabled.
When [TC Generator] is set to “Regen”, this item appears as “<Regen>” and preset is disabled.
Drop Frame
For setting the framing mode of the time code generator.
Non Drop:
Internal time code generator works in the non-drop-frame mode. Use this setting when placing emphasis on the number of frames.
Drop:
Internal time code generator works in the drop-frame mode. Use this setting when placing emphasis on the recording time.
[Setting Values: Non Drop, Drop]
Memo
This item can be set only when [System] [Record Set] [Record Format] [ 
Frame Rate] is set to “60p”, “30p”, or “60i”.
However, when “Free Run (GPS)” is selected for [TC Generator], this item is fixed at “Drop” and cannot be selected.
When [Frame Rate] is “24p”, “Non Drop” becomes fixed and cannot be selected.
When [Frame Rate] is “50p”, “25p”, or “50i”, this item appears as “---” and cannot be selected.
Frame Rate
