Shooting Assist Item

Focus Assist

For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.

[Setting Values: On, REC button Off]

Type

For configuring the behavior when operating the user button that is assigned with the [Focus Assist] function.

Focus Assist Function

ACCU-Focus:
Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU-Focus function switches automatically to “Off” after about 10 seconds.

Normal:
Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].

[Setting Values: ACCU-Focus, REC button Normal]

Color

For setting the display color of the focused area when Focus Assist is activated.

[Setting Values: REC button Blue, Green, Red]

Zebra

For selecting whether to display zebra patterns at the bright areas of the subject.

Select “On” to display zebra patterns or “Off” to hide.

[Setting Values: On, REC button Off]

Detect

For configuring the timing to detect the zebra pattern display.

Converted ITU709:
Performs detection after converting to the ITU709 color space.

HLG/J-Log1:
Performs detection before converting to the ITU709 color space.

[Setting Values: Converted ITU709, REC button HLG/J-Log1]

Memo

This item is selectable only when [Color Space] is set to “J-Log1” or “HLG” and [Convert to ITU709] is set to “Cam” or “Cam + Return”.

Top

For setting the maximum luminance level for the zebra pattern display.

[Setting Values: Over, 100%, 98%, 95% to 5% (in 5% increments)] ( REC button 80%)

Bottom

For setting the minimum luminance level for the zebra pattern display.

[Setting Values: 100%, 98%, 95% to 0% (in 5% increments)] ( REC button 70%)

Memo

The relation between Top and Bottom is such that Top>Bottom always holds. To maintain this relation during setting, the setting value is automatically corrected.

Peaking Frequency

For setting the frequency bandwidth for emphasizing the outline using the [PEAKING] button.

[Setting Values: High, REC button Middle, Low]

Histogram

For setting whether to display the histogram, which shows the distribution of different points with different levels of brightness in an image.

[Setting Values: On, REC button Off]

Histogram Top

For selecting the maximum brightness limit for changing the histogram display color.

[Setting Values: 5% to 110% (in 5% increments)] ( REC button 80%)

When [Color Space] is set to “J-Log1”

[Setting Values: -5F-stop, -4F-stop, -3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%), ⅓F-stop, ⅔F-stop, 1F-stop, 1⅓F-stop, 1⅔F-stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, REC button 3F-stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop, 5½F-stop]

Memo

When [Color Space] is set to “J-Log1”, a green line appears which corresponds to the “0F-stop(18%)” portion of the subject with 18% reflectance.

Histogram Bottom

For selecting the minimum brightness limit for changing the histogram display color.

[Setting Values: 0% to 105% (in 5% increments)] ( REC button 20%)

When [Color Space] is set to “J-Log1”

[Setting Values: -6F-stop, -5F-stop, -4F-stop, REC button -3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%), ⅓ F-stop, ⅔ F-stop, 1F-stop, 1 ⅓ F-stop, 1 ⅔ F-stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, 3F-stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop]

Memo

When [Color Space] is set to “J-Log1”, a green line appears which corresponds to the “0F-stop(18%)” portion of the subject with 18% reflectance.