Video Set Item

HDMI/SDI OUT

For configuring the video output from the [HDMI] or [SDI OUT] terminal when [System] is configured to “4K EXT(SSD)”.

[Setting Values: SDI, HDMI]

Memo

Configure using this item even when [System] is configured to “4K” and [Slot Mode] is configured to “Backup EXT ”.

SDI OUT

For configuring video output from the [SDI OUT] terminal.

[Setting Values: On, Off]

Memo

When a resolution with no SDI output is selected, the setting is fixed at “Off”.

This item is fixed at “Off” when the [HDMI/SDI OUT] item is displayed and a setting other than “SDI” is selected.

Character

For configuring whether to show the display and menu on the [SDI OUT] terminal.

[Setting Values: On, Off]

Resolution

For selecting the resolution of video output from the [SDI OUT] terminal according to the monitor to be connected.

[Setting Values: 1080psF, 1080p, 1080i, 720p, 576i, 480i, 480i (2:3pd)]

Memo

The selectable options vary according to the [System] arrowR [Record Set] arrowR [Record Format] arrowR [System]/[ SlotA_B Resolution] setting.

Cross conversion output is not possible.

When [A/V Set] arrowR [Video Set] arrowR [SDI OUT] arrowR [Resolution] is set to “1080p”, configuring [System] arrowR [GPS] to “On” changes the setting to “1080i”. 550 SPC

3G-SDI Mapping

For configuring the mode of mapping for signals output from the [SDI OUT] terminal.

[Setting Values: Level B, Level A]

Memo

SDI output is configurable only when the setting is set to “1080p”.

When [SDI OUT] is configured to “Off”, this item cannot be configured.

Rec Trigger

For configuring whether to superimpose trigger signals on the [SDI OUT] terminal in tandem with the [REC] button.
If “Type-A” or “Type-B” is specified, it is possible to record on a device equipped with SDI record trigger in tandem with the operation of the [REC] button.

When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.
The record trigger output status to the connected device is indicated by REC /STBY on the display screen.

[Setting Values: Type-A, Type-B, Off]

Memo

If “Type-A” does not work, it may operate in the “Type-B” setting, but the user’s bit to the connected device will not be correctly output.

Even if REC arrowR /STBY arrowR is displayed on the display screen, the compatible device may not necessarily be recording.

This item can be configured when [SDI OUT] is configured to “On” and [Rec Mode] is configured to “Normal”, “Pre Rec” or “Clip Continuous”.

Set to “Off” if connecting to a device that does not support record trigger.

HDMI OUT

For configuring video output from the [HDMI] terminal.

[Setting Values: On, Off]

Memo

Monitor and menu displays are not output from the [HDMI] terminal.

This item is fixed at “Off” when the [HDMI/SDI OUT] item is displayed and a setting other than “HDMI” is selected.

Resolution

For selecting the resolution of video output from the [HDMI] terminal according to the monitor to be connected.

[Setting Values: 2160/60p, 2160/50p, 2160/30p, 2160/25p, 2160/24p, 1080/60p, 1080/50p, 1080/30p, 1080/25p, 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i, 480p(2:3pd)]

Memo

The selectable options vary according to the settings in [System] arrowR [Record Set] arrowR [Record Format] arrowR [System] and [ SlotA_B Resolution]/[ EXT Resolution].

Cross conversion output is not possible.

When in the Camera mode, selecting “SD” for [System] arrowR [Record Set] arrowR [Record Format] arrowR [System] fixes the resolution at “480p” or “576p”.

Color

For setting the color format of HDMI signals.

[Setting Values: RGB, Auto]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Colorimetry

For configuring the colorimetry of the HDMI signal when [Camera Process] [Color Space] [Colorimetry] is set to “ITU2020”.

ITU2020:
Outputs using the colorimetry of ITU2020 regardless of the device that is connected via HDMI.

ITU709:
Outputs using the colorimetry of ITU709 regardless of the device that is connected via HDMI.

Auto:
Switches the colorimetry automatically according to the device that is connected via HDMI.

[Setting Values: ITU2020, ITU709, Auto]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

This item can be configured when [HDMI Color] is set to “Auto”.

This item cannot be configured when [Camera Process] arrowR [Color Space] arrowR [Colorimetry] is set to a setting other than “ITU2020”.

Enhance

For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.

[Setting Values: On, Off]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Rec Trigger

For configuring whether to superimpose trigger signals on the [HDMI] out terminal in tandem with the [REC] button.

If “On” is specified, it is possible to record on a device equipped with HDMI record trigger in tandem with the operation of the [REC] button.

When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.

The HDMI record trigger output status to the connected device is indicated by REC /STBY on the display screen.

[Setting Values: On, Off]

Memo

Even if REC arrowR /STBY arrowR is displayed on the display screen, the compatible device may not necessarily be recording.

This item can be configured when [HDMI OUT] is set to a value other than “Off”, and [Rec Mode] is set to “Normal”, “Pre Rec” or “Clip Continuous”.

Set to “Off” if connecting to a device that does not support record trigger.

TC

For setting whether to superimpose time code to the [HDMI] terminal.

[Setting Values: On, Off]

Memo

This item can be configured when [HDMI OUT] is set to a setting other than “Off”.

Set to “Off” if connecting to a device that does not support HDMI TC.