For setting whether to enable the dynamic zoom function.
Zoom Function Settings
Dynamic Zoom
On:
Enables the dynamic zoom (1x to 40x).
Off:
Enables only the optical zoom (1x to 20x).
[Setting Values: On, 
Off]
Memo
When [System] is set to “4K EXT (SSD)”, “4K” or “High-Speed”, this item is fixed at “Off” and cannot be selected.
When [Digital Extender] is set to “On”, “Off” becomes fixed and cannot be selected.
Response
For specifying the speed of zoom response when Dynamic Zoom is “On”.
[Setting Values: Slow, Normal]
Memo
When [Dynamic Zoom] is “Off”, this item appears as “---” and cannot be selected.
Digital Extender
For specifying whether to magnify the image (by 2 times). When “On” is selected, a 
icon appears.
[Setting Values: On, Off]
Memo
When [System] is set to “4K EXT (SSD)”, “4K” or “High-Speed”, this item is fixed at “Off” and cannot be selected.
When [Dynamic Zoom] is set to “On”, “Off” becomes fixed and cannot be selected.
Handle Zoom Speed
This function allows you to set the zoom speed of the zoom lever at the handle when the [ZOOM FIX/VAR/OFF] switch is set to “FIX”.
[Setting Values: 1 to 8 ( 5)]
Focus Tracking
For specifying whether to track the focus during zooming.
On:
Tracks the focus during zooming.
Off:
Gives priority to the zoom speed and does not track the focus during zooming.
[Setting Values: On, Off]
Memo
Zoom speed may be affected when zooming is performed near the tele-end.
Preset Zoom
For setting the speed for shifting to the preset zoom position and the rate of change for starting and stopping the preset zoom operation of the preset zoom function assigned to the user button.
Speed
For setting the speed to shift to the preset zoom position.
[Setting Values: 1 to 21 ( 11)]
Ease In
For setting the rate of change from the start of the zoom operation until the predetermined [Speed] is reached.
The larger the setting value, the longer it takes to reach the value specified in Speed.
[Setting Values: 1 to 5, Off]
Ease Out
For setting the rate of change from the predetermined [Speed] until the zoom operation stops.
The larger the setting value, the longer it takes before the operation stops.
[Setting Values: 1 to 5, Off]
REMOTE Zoom Ease
For specifying whether to zoom in or zoom out slowly when zoom operation starts or during zooming using a wired remote control.
Off:
Disables zoom ease.
1:
Enables zoom ease.
2:
Enables zoom ease. (Maximum zoom speed is about half of that in “1”)
SW Set:
Switches between “Off, 1 and 2” using the “zoom speed selection switch”
Switch position/setting
OFF / Off
VAR / 1
FIX / 2
[Setting Values: SW Set, 2, 1, Off]
Caution
To speed up zoom operation when the setting is configured to “1” or “2”, this can be done by pressing the zoom lever on the remote control unit all the way to cancel the zoom ease mode. However, cancellation of the zoom ease mode is not possible on some remote control unit models and in some settings.
Even when the setting is configured to “SW Set”, it is still possible to adjust the zoom speed using the “handle zoom lever”, which is a feature of the “zoom speed selection switch”.
Web Zoom Ease
For specifying whether to zoom in or zoom out slowly when zoom operation starts or during zooming using the View Remote feature.
[Setting Values: On, Off]
