You can dub videos in standard quality by connecting to a VCR.
-
- Copying
-
Dubbing Files to a VHS Tape by Connecting to a VCR
Dubbing Files to a VHS Tape by Connecting to a VCR
Refer also to the instruction manuals of the TV and VCR.
Remove the AC adapter and battery pack from this unit.
Connect to a VCR/DVD recorder.
Connect using the provided AV cable.
Connect the AC adapter to this unit.
Be sure to use the supplied AC adapter.
Turn on the power.
Press the 
button to select the playback mode.
Check if the playback mode is 
.
If the mode is 
still image, tap on the playback screen to display the mode switching screen.
Tap to switch the mode to video. (You can also use the / button on this unit.)
Prepare the TV/VCR for recording.
Switch to a compatible external input.
Insert a video tape.
Prepare this unit for playback.
Set “VIDEO OUTPUT” in the “CONNECTION SETTINGS” menu to the aspect ratio (“4:3” or “16:9”) of the connecting TV.
Start recording.
Start playback on this unit and press the record button on the recorder.
After playback is complete, stop the recording.
Memo
AV cable (P/N: QAM1322-001)
Wiring specifications (for video/audio) of the 4-pole mini plug are described in the following.
For purchasing, consult your nearest JVC service center.
Memo
To include the recording date and time during dubbing, set “DISPLAY DATE/TIME” in the “PLAYBACK SETTING” menu to “ON”. Or, set “DISPLAY ON TV” in the “CONNECTION SETTINGS” menu to “ON”.