-
- Copying
-
Dubbing Files to a Disc by Connecting to a Blu-ray Recorder
Dubbing Files to a Disc by Connecting to a Blu-ray Recorder
You can dub videos in the high definition quality by connecting an AVCHD-compliant Blu-ray recorder to this unit via a USB cable. For details on creating the disc, refer to the instruction manual of your Blu-ray recorder.
This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.
Open the terminal cover.
Connect to a Blu-ray recorder.
Connect using the USB cable provided with this unit.
Before making any connection, close the LCD monitor to turn off this unit.
Open the LCD monitor.
This unit turns on and the “SELECT DEVICE” screen appears.
Tap “CONNECT TO OTHER”.
Tap the desired media.
The following screen is displayed after the camera operation is completed.
Operations are to be performed on the Blu-ray recorder after the screen switches.
Perform dubbing on the Blu-ray recorder.
Refer also to the instruction manual of the Blu-ray recorder.
After dubbing is complete, close the LCD monitor of this unit and check that the POWER/ACCESS lamp goes off before disconnecting the USB cable. Operations cannot be performed on this unit until the USB cable is disconnected.
Memo
To copy videos that are recorded in the 50p mode (when “SYSTEM SELECT” is set to “50p”), use an AVCHD Progressive compatible Blu-ray recorder.
Videos that are recorded in the 50p mode (when “SYSTEM SELECT” is set to “50p”) can only be copied to Blu-ray discs.