Transferring Videos (AVCHD format)

Transfer videos recorded in AVCHD format to the smartphone.

Caution

The video to be forwarded is converted to the following format.

Item

Details

System

MP4

Video

Codec

H. 264/MPEG-4 AVC Baseline Profile

Resolution
* Bit rate is indicated in ( )

640X360 (1Mbps)

Frame rate

30p

Audio

Coding system

AAC

Sampling rate

48kHz

Bit

16 bit

Number of channels

2 ch

Start “Everio sync. 2” on a smartphone.

C2-WiFi_SP_Appli Icon

Start the application after confirming that the smartphone is connected to this camera.

Select the connection type to the camera.

Everio Sync.3-1

Tap the current connection type.

Recording screen appears.

Tap “Index”.

C4B9 Appli Android Top

In the index screen, tap the desired images to transfer.

Appli Android  Video Thumbnail2

Confirm that the “AVCHD” tab is indicated in the lower part of the screen.

Files are displayed as a split files by certain lengths of time. Enter the check mark ( num_1 ) to the files to transfer, and tap the transfer mark icon ( num_2 ) on the lower right.

Appli Android Start Time

Number of the selected image files is indicated next to the check mark in lower left.

To set the length of video you are transferring, refer to the below instructions.

Tap “TRANSFER”.

Appli Android Manual Time

Tap “CANCEL” to cancel the operation.

“TRANSFER” starts.

Appli Android Manual Time2

Tap “CANCEL” to cancel the operation.

After transferring is complete, tap “OK”.

Appli Android Completion

To play back and check the video, tap “CHECK”. (Android only)

To upload the video, tap “SHARE”. (Android only)
Tap the desired service, then proceed to the uploading process.
To make use of a service, it is necessary to perform registration beforehand.

Transferring manually

You can set the length of transferred video.

Tap “MANUAL” in step 5.
At the start point, enter the starting time of the video.
Specify the lengths of the video by using the slider bar. (10 to 300 sec)
After confirming the setting, tap “TRANSFER”, and then tap “TRANSFER” one more time.
Appli Manual transfer

Tap “+”“-” to set the start point of the video transfer (minutes/seconds).

Length of the transferred video can be adjusted by using the slider bar.

The longer the length of the transferred video is set, the longer it takes to transfer the video.