-
- Getting Started
-
Inserting an SD Card
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.
Depending on the setting of the recording media, recording can be made to the SD card without using the built-in memory.
Warning
Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.
Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.
Do not touch the metal contact area when inserting the SD card.
Memo
Both videos and still images can be recorded on one SD card. It is recommended to confirm the video operation of the SD card before usage.
To use a new SD card, or SD card used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from the “SETUP” menu.
Removing the Card
Push the SD card inward once, then pull it out straight.
![C4B5 SD Card Out](fig/C4B5 SD Card Out_GFNFILjjpwunls.png)