For setting whether to display the display and menu characters on the external monitor.
Video Set Item
TOPDisplay On TV
[Setting Values: On, 
Off]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, Off]
Resolution
For selecting the resolution of video output from the [HDMI]/[SDI] terminal according to the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p, 1080i]
Memo
The selectable options vary according to the setting in [System]/[Resolution]/[Frame & Bit Rate] of [System] 
[Record Set] [Record Format].
Cross conversion output is not possible.
HDMI Color
For setting the color format of HDMI signals.
This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, Auto]
HDMI Enhance
For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.
This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, Off]
SDI Rec Trigger
For setting whether to superimpose trigger signals in tandem with the [HD/SD SDI OUT] terminal as well as the [REC] button on the camera body.
When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.
Both REC/STBY and Display are displayed.
[Setting Values: On, Off]
SD Aspect
For setting the style of displaying down-converted images on a 4:3 aspect ratio screen.
Side Cut:
Displays image with the left and right sides cut off.
Letter:
Displays as a wide image with the top and bottom blackened.
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, Squeeze]
Memo
When [Record Format] [System] is set to “SD”, and when [SD Aspect] is set to “4:3”, this item appears as “---” and cannot be selected.
SD Set Up
For selecting whether to add a setup signal to the video signal output from the [AV] output terminal.
Setup signals are added when “7.5%” is selected.
[Setting Values: 7.5%, 0.0%]
(Default values: 7.5% (U model), fixed at “0.0%” (E model))
Memo
Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.