For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.
Shooting Assist Item
TOPFocus Assist
[Setting Values: On, 
Off]
Type
For specifying the operation when the [FOCUS ASSIST/1] button is pressed.
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU-Focus function switches automatically to “Off” after about 10 seconds.
Normal:
Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].
[Setting Values: ACCU-Focus, Normal]
Color
For setting the display color of the focused area when Focus Assist is activated.
[Setting Values: Blue, Green, Red]
Zebra
For selecting whether to display zebra patterns at the bright areas of the subject.
Select “On” to display zebra patterns or “Off” to hide.
[Setting Values: On, Off]
Top
For setting the maximum luminance level for the zebra pattern display.
[Setting Values: Over, 100% to 5% (in 5% increments)] ( 80%)
Bottom
For setting the minimum luminance level for the zebra pattern display.
[Setting Values: 100% to 0% (in 5% increments)] ( 70%)
Memo
The relation between Top and Bottom is such that Top>Bottom always holds. To maintain this relation when setting Top, the Bottom value is automatically corrected.