Global
Mobile User Guide

[PTZ Control]

TOP

Controls the PTZ function. Operate the camera to adjust the direction, angle and focus.

This page can be used during access using “admin” or “operator”.

While another menu is open, click [Control] to switch to the Control Menu. Click [PTZ Control] to open the Settings screen.

Viewer04

Selectable Auto functions

Auto Pan:
Performs the configured auto pan operation.

Auto Patrol 0 to 2:
Perform the preset Auto Patrol operation corresponding to the selected number. Repeats from the beginning after the series of operations are complete.

Auto Trace:
The configured Auto Trace operation is performed. Returns to the starting position after completing the series of operations, and resumes after 30 seconds.

Note

When the [Mode] item of [Auto Return] is set to “Auto Patrol” and Auto Patrol starts in this screen, the “Auto Patrol” mode of [Auto Return] will be changed to the mode that was started in this screen.

If Auto Return function is set, Auto function that was started manually is stopped when Auto Return starts.

Global
Mobile User Guide
VN-H657U (A) / VN-H657WPU
Mobile User Guide