> Charging > Charging the charging case

Charging the charging case

When using a commercially available USB conversion AC adapter, make sure to choose one with an output voltage of DC 5 V and output current of 1 A and above. Otherwise, it may result in malfunction or abnormal heating.

Use only the supplied charging cable for charging.

Connect the charging cable provided to start charging.

Using the supplied charging cable, connect the charging case and a commercially available USB conversion adapter.

Insert the USB AC adapter into the AC outlet to start charging.

charging_2_No-PC_charge_A25T + Charge_2_A25T


The indicators flash and light up, indicating that charging has started.

The charging time for the charging case is approx. 2.5 hours.

Indicators on the charging case

Case_lamp_A25T + Case_lamp_A25T



During charging, the indicators light up and flash. When charging is complete, the indicators will turns off.

After charging is complete, unplug the USB charging cable.

The charging case may stop charging if the temperature exceeds the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). (The indicator on the charging case flashes twice repeatedly). Charging will resume automatically in an environment where the temperature is back within the charging temperature range.

To prevent deterioration of the battery, charge the charging case once every 6 months when it has not been used for a long period of time.

When charging the charging case that has not been used for a long period of time, it might take some time for the indicators to light up or flash. Wait for the indicators to light up or flash.