> Audio / Phone > Audio operation
Audio operation
Wearing
Identify the L and R sides of the earphones and put them on correctly.
There is a semicircle raised bump on the L (left) side.
Left: Bump
Hold the earphones as shown in the diagram and fit them into your ears.
Insert the earphones with the logo in the horizontal position. Rotate the earphones and adjust to the most comfortable angle.
The medium-size silicone ear pieces are attached when purchased.
To enjoy good sound quality, choose the most suitable earpieces and size and fit them into your ears.
Incorrect ear piece size can result in sound leakage and lack of bass.
Check that the ear piece is securely attached as shown in the figure.
If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.
Remote control operation (when using both L and R earphones)
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
1x
2x
2x
3x
3x
5x
1second
1second
Touch sensor area
Toggling on/off the ambient sound function
Toggling on/off the noise canceling function
Toggling on/off the low latency mode
Switching the sound mode
Play/Pause (
)
Tap the touch sensor area on the L earphone once quickly.
Toggling on/off the ambient sound function (Touch & Talk function)
Tap the touch sensor area on the R earphone once quickly.
When the ambient sound function is used, the volume of the music playback will decrease and ambient sounds can be heard more easily with the built-in microphone.
When the noise canceling function is turned on, one quick tap on the R touch sensor area switches between the noise canceling function and the ambient sound function.
Volume adjustment (
/
)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
Skip to the next track (
)
During playback, tap the touch sensor area on the R earphone twice quickly.
Skip to the previous track or beginning of the current track (
)
During playback tap the touch sensor area on the R earphone 3 times quickly.
Toggling on/off the noise canceling function
Touch the touch sensor area of the R earphone for about 1 second, and release your finger when you hear a beep sound.
Using the noise canceling function mainly helps to reduce ambient noises such as noise in a vehicle and noise from air conditioners in a room.
The noise canceling function is set to on during factory default.
Switching the sound mode function
Touch the touch sensor area of the L earphone for about 1 second, and release your finger when you hear a beep sound.
Each time you tap the earphone for about 1 second and release your finger, the sound mode feature will switch alternately to the bass or flat mode.
You will hear an audio guidance when the function is switched.
Toggling on/off the low latency mode
Tap the touch sensor area on the L earphone 5 times quickly.
When you feel that there is a time lag between the video images and audio sound while viewing a video, using the low latency mode can help to reduce the lag.
“Low Latency” can be heard from the audio guidance when you turn on the low latency mode. “Normal Latency” can be heard from the audio guidance when you turn off the low latency mode.
Remote control operation (when using only the L earphone)
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area on the L earphone once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
Remote control operation (when using only the R earphone)
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area on the R earphone once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area on the R earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the R earphone twice quickly.
The music will return to the original volume when a user quits the ambient sound function. If you have raised the volume while listening to surrounding sounds, take note that the volume will increase when you return to music playback.
The ambient sound function draws surrounding sounds from the built-in microphone. Touching the microphone hole allows you to hear a noise. Take note not to touch or cover the microphone hole accidentally when operating the earphone.
Microphone hole
Toggling of the ambient sound function and the noise canceling function only works when the earphones are connected to the BLUETOOTH device.
The noise canceling function is effective for low-pitched sounds such as noise in a vehicle and noise from air conditioners in a room but less effective for relatively high-pitched sounds such as announcements, conversations and bells in vehicles.
The audio that is currently playing may be interrupted when you are using the low latency mode. For more details about how to address this issue, please refer to Troubleshooting
When the remaining battery power becomes low, the audio guidance will be heard from the earphone.
When watching movies with the earphones, a slight time lag may occur in the audio output.
We do not guarantee all operations of the BLUETOOTH device.