Connecting
-
1Check that the power is turned off.ON/OFF
-
-
2Perform one of the following operations depending on the connection status.
-
When connecting for the first time
Hold down
button for 3 seconds until the indicator flashes alternately in red and blue.When there are 2 or more the BLUETOOTH devices to connect to
Hold down
button for 7 seconds until the indicator flashes alternately in red and blue.
-
3Turn on the Bluetooth function of the BLUETOOTH device.
-
-
4Select “JVC HA-EN10BT” from the device list.
-
The indicator flashes slowly in blue when a connection is completed.
During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.