> Connecting > Pairing

Pairing

1Check that the indicator is turned off.

connecting 1 OFF FX87BN

2Press and hold Maru until the indicator repeatedly flashes red and blue quickly and alternately.

Release your finger once you confirmed that the indicator is repeatedly flashing red and blue quickly and alternately.

connecting_FX87BN

If the indicator does not flash red and blue quickly and alternately (flashing in red for example), refer to Power Off to turn off the power, then press and hold Maru again.

3Turn on the Bluetooth function of the BLUETOOTH device.

connecting 2 New

4Select “JVC HA-FX65BN” from the device list.

connecting 3 Cap + Device List

JVC HA-FX65BN

The indicator flashes slowly in blue when a connection is completed.

BLUETOOTH_FX87BN

During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.

If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.