> Audio / Phone > Listening to Music
Listening to Music
-
1Check both the L (left) and R (right) earphones.
-
There is a raised hemispherical portion on the L (left) earphone.
Left: Bump
-
2Hold the earphones as illustrated in the diagram so as not to touch the touch sensor areas.
-
Touch sensor area
-
3Attach the ear hook to the space between your ear and head.
-
Ear hook
-
4Turn the ear hook toward the back of your ear.
-
-
5With the ear hook secured at the back of your ear, rotate this unit to adjust its position. Also, press the unit against your head so that the earphone is in close contact with your ear.
-
Attach the earphone correctly as illustrated in the diagram.
Correct
Wrong
If the earphone shifts away from your ear or is attached too high up the ear, it may fall off or the audio sound may not be clearly audible. Wear the earphones correctly.
Launch the music player app on the BLUETOOTH device connected, to start playback.
1x
1x
2x
2x
3x
3x
1second
1second
Switching the sound mode
Switching the sound mode
Touch sensor area
Play/Pause (
)
Tap the L or R touch sensor area once quickly.
Volume adjustment (
/
)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
Skip to the next track (
)
During playback, tap the touch sensor area on the R earphone twice quickly.
Skip to the previous track or beginning of the current track (
)
During playback tap the touch sensor area on the R earphone 3 times quickly.
Switching the sound mode
Touch the touch sensor area of the L or R earphone for about 1 second. Release your finger when you hear a beep sound.
Each time you tap the earphone for about 1 second and release your finger, the sound mode will switch alternately as follows.
NORMAL
HIGH
BASS
You will hear an audio guidance when the function is switched.
NORMAL:
This is the normal mode.
HIGH:
This mode boosts the midrange to enhance audibility in noisy environments.
BASS:
This mode offers a sound balance with a stronger bass.
When the remaining battery power becomes low, you will hear an audio guidance sound which informs you that the remaining battery level is low.
When the remaining battery power becomes low, the power will turn off automatically from the earphone that had ran out of battery.
When watching movies with the earphones, a slight time lag may occur in the audio output.
Due to the structural design of the earphones, increasing the volume excessively may cause sound to leak. Pay attention not to turn up the volume too high to prevent causing inconvenience to the surrounding people.
We do not guarantee all operations of the BLUETOOTH device.
Launch the music player app on the BLUETOOTH device connected, to start playback.
The L earphone is used in the illustration.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area 3 times quickly.
To lower the volume, tap the touch sensor area twice quickly.
When the remaining battery power becomes low, you will hear an audio notification through the earphones.
When the remaining battery power becomes low, the power will turn off automatically from the earphone.
When watching movies with the earphones, a slight time lag may occur in the audio output.
Due to the structural design of the earphones, increasing the volume excessively may cause sound to leak. Pay attention not to turn up the volume too high to prevent causing inconvenience to the surrounding people.
We do not guarantee all operations of the BLUETOOTH device.