> Connecting > Pairing

Pairing

1Check that the power is turned off.

Power lamp OFF S20

2Perform one of the following operations depending on the connection status.

When connecting for the first time

Hold down Maru2 button for 3 seconds until the indicator flashes alternately in red and blue.

When there are 2 or more the BLUETOOTH devices to connect to

Hold down Maru2 button for 5 seconds until the indicator flashes alternately in red and blue.

connecting S20BT

3Turn on the Bluetooth function of the BLUETOOTH device.

connecting 2 New

4Select “JVC HA-S20BT” from the device list.

connecting 3 S20BT

The indicator flashes slowly in blue when a connection is completed.

blue_flash S20BT

During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.

If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.