Pairing

1Check that the indicator is turned off.

connecting_1_OFF_S24W

2Press and hold Maru_S24W_S23W_S22W until the indicator repeatedly flashes red and blue quickly and alternately.

Release your finger once you confirmed that the indicator is repeatedly flashing red and blue quickly and alternately.

connecting_S24W

If the indicator does not flash red and blue quickly and alternately (flashing in red for example), refer to Power Off to turn off the power, then press and hold Maru_S24W_S23W_S22W again.

3Turn on the Bluetooth function of the BLUETOOTH device.

connecting 2 New

4Select “JVC HA-S24W” from the device list.

connecting 3 Cap + Device List JVC

JVC HA-S24W

The indicator flashes slowly in blue when a connection is completed.

blue_flash_S24W

During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.

If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.