OUTDOOR MONITORING

Setting (Once setting is done, start from the “Regular Operation” below)

1Obtaining a Dynamic DNS Account

By obtaining a dynamic DNS account, this unit may be used on the web as usual even if the IP address changes when making an access to this unit via internet.

Only the JVC dynamic DNS service can be set on this camera.

To obtain (register) an account, perform the following steps.

Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)

Set your e-mail address as the username.

Check that you have received a confirmation e-mail to the address used in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)

Set the username and password used in registration on the camera.
(Operation on this camera)

Execute OUTDOOR MONITORING.
(Operation on this camera)

If “OUTDOOR MONITORING” is executed while dynamic DNS settings are enabled, the camera will access the dynamic DNS server.

Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is displayed.
(Registration complete)

Caution

Registration will be canceled if you do not access the dynamic DNS server from the camera within 3 days.
Perform the registration again in this case.

Registration will not be complete if the username and password set on this camera are incorrect. Be sure to check that they are correct.

Successful registration will be canceled too if you do not access the dynamic DNS server for 1 year.

2Create a QR code.

Enter values in the required items for outdoor monitoring.

Password: set a password to connect this camera to the device via an access point. (Not more than 8 characters)

DDNS: Set the connection environment to the internet. Normally set to “ON”.

User name (DDNS): set an user name for the obtained DDNS account.

Password (DDNS): set a password for the obtained DDNS account.

UPnP: Set to “ON” if the UPnP protocol may be used to connect the device to the network.

HTTP Port: Set the port number for connecting to the internet. Normally set to “80”.

Input Form

Password (no value if it is not set)

DDNS
DDNS User Name (no value when DDNS=OFF)

DDNS Password (no value when DDNS=OFF)

UPnP
HTTP Port (0 to 65535)

3Display the screen for reading the QR code.

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “SET FROM QR CODE”.

C3_WiFi_COMMON-SET_QRCORD

Tap “EXECUTE”.

C3_WiFi_QR_CORD_SET_USERGUIDE

4Read a QR code.

Read a QR code.
(Operation on this camera)

C3_WiFi_COMMON-SET_READ_QRCORD

Tap “YES”.

C3_WiFi QR_CORD OUTDOOR OVERWRITTEN

Tap “OK”.

C3_WiFi_QR_CORD_SETTING_DONE

Tap “NEXT” to return to the screen to read the QR code.

Set contents are saved.

5Registering the access points (wireless LAN router) to this unit

Wi-Fi Protected Setup (WPS) Registration

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “EZ REGISTRATION WPS”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_WPS

Activate WPS of the access point (wireless LAN router) within 2 minutes.

To activate WPS, refer to the instruction manual of the device in use.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Search the access point, and select from the list.

Set the name (SSID) of the access point (wireless LAN router) and the password beforehand.

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap Cursor_Right on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “SEARCH”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S1

The search results appear on the camera’s screen.

Tap the name (SSID) of the desired access point from the list of search results.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S2

Register a password.
(Operation on this camera)

C2-WiFi_Passwardx8

Tap on the on-screen keyboard to enter characters. The character changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

Tap “DELETE” to delete a character.

Tap “CANCEL” to exit.

Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

Tap LEFT or RIGHT to move one space to the left or right.

The password is not required if the wireless LAN router is not security protected.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Other methods, such as “Manual Registration” and “WPS PIN Registration” are also available. Refer to the following link for details.

Regular Operation

6Connect this camera to a smartphone (or computer).

Tap “MENU”.
(Operation on this camera)

Tap MENU

The top menu appears.

Tap the “Wi-Fi” ( Wi-Fi ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap “OUTDOOR MONITORING” ( O-MONITOR ).
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “START” ( C2_Stamp-Arrow ).
(Operation on this camera)

C3_WiFi_O-MONITOR

Start making a connection.
(Operation on this camera)

C3_WiFi_O-MONITOR_CONNECT_STOP

Name (SSID) of the access point (wireless LAN router) in connection is displayed.

The following is displayed when the camera is connected to the access point.

C3-Wi-Fi_Screen_Wi-Fi

The URL (WAN) for the smartphone to connect to appears.
(Does not appear if DDNS is not set or set incorrectly.)

batsu UPnP” is displayed when UPnP cannot be used.

Check the URL (WAN).

C3_WiFi_NETWORK_INFO_CONNECT_QUIT

After checking the URL, tap “QUIT” to return to the previous screen.

batsu UPnP” is displayed when UPnP cannot be used.

Operation on the smartphone

Memo

Prior to use this function, a smartphone application needs to be installed on the smartphone.

Start “Everio sync. 2” on the smartphone after setting OUTDOOR MONITORING.

Smartphone

Tap “START” in OUTDOOR MONITORING on the camera to start.

Tap “OUTDOOR MONITORING”.

Everio Sync.2-1

Log in with your username and password.
(if authentication cannot be achieved)

C2-WiFi_SP_Appli ID-PASS

The username is “everio” and the default password is “0000”.

The recording screen is displayed.

Appli Android Top1

Operate from a smartphone

Smartphone

How to operate from a smartphone

Monitoring from the computer (Windows7)

On the Internet Explorer (web browser), enter the URL (WAN) that is checked by “Operation on this camera”.

Internet explorer

Log in with your username and password.

The username is “everio” and the default password is “0000”.

Operations from the Web browser