Camera Function Menu

Menu screen for specifying operation settings during shooting.

This item can only be selected in the Camera mode.

Bars

For setting whether to output color bars.

[Setting Values: On, REC button Off]

Memo

The audio test signals (1 kHz) can be output simultaneously with the color bar output.

Test Tone

When the AUTO MODE FULL/PRESET/OFF switch is set to “PRESET” and [Bars] in [Main Menu] arrowR [Camera Function] arrowR [PRESET AUTO] is set to Off, this item is fixed at “Off”.

Bars

OIS Lenz

For setting whether to enable image stabilizer.

[Setting Values: REC button On, Off]

Memo

When the lens used supports the image stabilizer feature and there is a “On”/“Off” switch on the lens, “Lens Set” appears and “On”/“Off” cannot be specified using the menu.

Shading Lenz

For selecting whether to correct the shading (decrease in light intensity around the lens) when a Micro Four Thirds lens (prime lens only) with shading data is attached.

[Setting Values: On, REC button Off]

Memo

When a lens without shading function (lens other than a Micro Four Thirds lens, Micro Four Thirds lens without shading data, and Micro Four Thirds zoom lens), this item is fixed at “Off” and cannot be selected.

Flicker Correction

For setting whether to adjust image flicker that occurs under a fluorescent light.

[Setting Values: On, REC button Off]

Shutter

For specifying shutter-related settings.

Set to “Step” (fixed value) or “Variable” when operating with the U_botton / D_botton volume buttons on the side of the camera recorder.

Variable:
Sets to variable scan. Use this setting when shooting a PC monitor.

Step:
Sets to step shutter, which switches the shutter speed by a fixed value.

[Setting Values: Variable, REC button Step]

AE Speed

For setting the convergence speed during AE (Auto Exposure).

[Setting Values: REC button Fast, Middle, Slow]

AGC Limit

For setting the maximum gain value of “AGC”, which electrically boosts the sensitivity level according to the brightness automatically.

When [Main Menu] arrowR [LCD/VF] arrowR [Display Settings] arrowR [Gain] is set to “dB”:
[Setting Values: 24dB, REC button 18dB, 12dB, 6dB]

When [Main Menu] arrowR [LCD/VF] arrowR [Display Settings] arrowR [Gain] is set to “ISO”:
[Setting Values: ISO 6400, REC button ISO 3200, ISO 1600, ISO 800]

Auto Iris Limit (OPEN) Lenz

For setting the limit value of the OPEN end when auto iris is enabled.

[Setting Values: F5.6, F4, F2.8, REC button F2, F1.8, F1.6, F1.4, F1.2]

Auto Iris Limit (CLOSE) Lenz

For setting the limit value of the CLOSE end when auto iris is enabled.

[Setting Values: F16, REC button F11, F8, F5.6]

EEI Limit

For setting the shutter speed control range when the Automatic Shutter mode (EEI) is enabled.

[Setting Values: 4F-stop, REC button 3F-stop, 2F-stop]

Smooth Trans

For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT.BAL B/A/PRST] switch.

[Setting Values: Fast, Middle, Slow, REC button Off]

Memo

This function is disabled when AGC is operating.

FAW

For setting the position in the white balance switch [WHT.BAL B/A/PRST] to assign the FAW (Full Auto White Balance) function.

[Setting Values: B, A, PRST, REC button None]

GAIN L/GAIN M/GAIN H

For setting the gain value of each position on the [GAIN] selection switch.

The setting is fixed at “AGC” in the Full Auto mode. In addition, the sensitivity setting in Lolux is used.

Lolux

When [Main Menu] arrowR [LCD/VF] arrowR [Display Settings] arrowR [Gain] is set to “dB”:
[Setting Values: AGC, 24dB, 21dB, 18dB, 15dB, 12dB, 9dB, 6dB, 3dB, 0dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN H: 12dB)

When [Main Menu] arrowR [LCD/VF] arrowR [Display Settings] arrowR [Gain] is set to “ISO”:
[Setting Values: AGC, ISO6400, ISO5000, ISO4000, ISO3200, ISO2500, ISO2000, ISO1600, ISO1250, ISO1000, ISO800, ISO640, ISO500, ISO400]
(Default values GAIN L: ISO400, GAIN M: ISO800, GAIN H: ISO1600)

Handle Zoom Speed L/Handle Zoom Speed M/Handle Zoom Speed H Lenz

For setting the zoom speed for each position on the [ZOOM L/M/H] zoom speed selection switch.
The larger the value the faster the zoom speed. Selecting “Off” disables the zoom operation on the handle.

[Setting Values: Off, 1 to 7]
(Default Values Handle Zoom Speed L: 1, Handle Zoom Speed M: 4, Handle Zoom Speed H: 7)

Memo

Depending on the lens used, the zoom speed may not change even if the speed setting of the zoom lever at the handle is changed.

Iris Dial

For assigning the iris, shutter or AE level adjustment to the iris dial.

[Setting Values: AE Level, Shutter, REC button Iris]

Grip Zoom Lenz

For assigning the zoom or focus function to the zoom lever at the grip.

[Setting Values: Focus, REC button Zoom]

Memo

Set to “Focus” when using a lens without focus ring.

The focus function may not work depending on the lens used.

AF Assist Lenz

For setting whether to shift the auto focus point when you operate the focus manually during Auto Focus (AF).

Far/Near:
This option allows you to shift the auto focus point to near and far directions by operating the focus manually during AF.

Off:
Sets the AF Assist function to “Off”.

[Setting Values: Far/Near, REC button Off]

AF Assist Function
Memo

This setting is effective only when the [FOCUS] switch is set to “AUTO”.

The manual focus adjustment mode is temporarily activated by operating the focus manually while in the AF mode. If manual focusing is not operated for a certain time, the camera recorder returns to the AF mode.

User Switch Set...

For specifying user button related settings.

User Switch Set Item

PRESET AUTO...

For performing settings of each operation item when the [AUTO MODE FULL/PRESET/OFF] switch has been set to “PRESET”.

PRESET AUTO Item