User Switch Set Item

USER1 to USER7, LCD KEY▲, LCD KEY▶, LCD KEY▼, LCD KEY◀

By assigning one of the following functions to each of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7] buttons or the cross-shaped buttons on the LCD monitor, these buttons can be used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.

[Setting Values: None, Bars, Lolux, AE Lock, Beautiful Skin, Face Detect, OIS, One Push Iris, Push AF/AF Lock, Preset Zoom1, Preset Zoom2, Preset Zoom3, White Balance, Zebra, Marker, Focus Assist, Expanded Focus, LCD Backlight, Backup Trig, Clip Cutter Trig, OK Mark, Clip Review, Load Picture File]

Front REC

For setting the function of the [REC] button located below the lens at the front of the unit.

REC:
Functions as a record button for starting/ending recording.

AWB:
When the [WHT BAL B/A/PRESET] selection switch is set to “A” or “B” in the Manual White Balance mode, it functions as an AWB startup button. If the [WHT BAL B/A/PRESET] selection switch is set to “PRESET”, it functions as a button for switching between two color temperature settings.

Manual White Balance Mode (Manual Switching)

None:
Disabled.

[Setting Values: REC button REC, AWB, None]

Clip Review

For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Clip Review”.

Last 5sec:
Views about 5 seconds of the clip from the ending.

Top 5sec:
Views about 5 seconds of the clip from the beginning.

Clip:
Views the entire clip.

[Setting Values: REC button Last 5sec, Top 5sec, Clip]

Memo

This item is selectable when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD KEY◀] items is set to “Clip Review”.

Face Detect

For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Face Detect”.

Select the control to track results of face detection.

AF&AE:
Sets auto focus and exposure control for the face that is being tracked.

AF:
Sets auto focus for the face that is being tracked.

[Setting Values: REC button AF&AE, AF]

Adjusting the Focusing by Face Detection
Memo

When “AF” is specified, this function will be activated only when the [FOCUS AUTO / MANU / arrowR AUTO] focus switch is set to “Auto”.
When “AF&AE” is specified, this function will be activated only when the [FOCUS AUTO / MANU / arrowR AUTO] focus switch is set to “Auto”, or when one or more of the items (Gain, Iris and Shutter) is set to Auto mode.

Sensitivity

For setting the level of ease of face detection.

[Setting Values: REC button High, Middle, Low]

Hysteresis

For setting the margin to maintain status when the face that is being tracked is lost.
Set to “Fast” to select another object immediately if the face on the screen is lost.
Set to “Slow” to operate at the same position for some time even if the face on the screen is lost.

[Setting Values: Fast, REC button Middle, Slow]

AE Lock

For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “AE Lock”.

AE:
Use this feature to fix a value to the Auto function of Gain, Iris, or Shutter when the user button that is assigned “AE Lock” is pressed.

AE/WB:
Use this feature to fix a value to White Balance and the Auto function of Gain, Iris, or Shutter when the user button that is assigned “AE Lock” is pressed.

[Setting Values: REC button AE, AE/WB]

Memo

This feature only works when Iris, Shutter or Gain is set to Auto mode.

“AE Lock” is canceled when the button assigned with “AE Lock” is pressed, or when any of the functions that can be locked is operated regardless of the mode (Manual or Auto).

Preset Zoom Speed

For setting the speed to shift to the preset zoom position that is assigned to a user button.

[Setting Values: 1 to 21 ( REC button 11)]

Memo

Three preset zoom positions can be set but the speed to shift to the preset zoom position cannot be specified individually.

Expanded Focus

For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Expanded Focus”.

Toggle:
Pressing the button assigned with “Expanded Focus” each time switches the “Expanded Focus” function to on or off.

Momentary:
The “Expanded Focus” function is enabled during the interval while the button assigned with “Expanded Focus” is pressed.

Limited Time:
Activates the timer.
During autofocus, the [Expanded Focus] feature turns off about 3 seconds after it is turned on.
During manual focus, the [Expanded Focus] feature turns off about 3 seconds after you stop operating the focus/zoom ring.

[Setting Values: REC button Toggle, Momentary, Limited Time]

Ring

For setting the focus/zoom ring operation.

SW Set:
This follows the settings of the [FOCUS/ZOOM] operation switch.

Focus:
When the Expanded Focus function is activated, focusing operation is possible regardless of the settings of the [FOCUS/ZOOM] operation switch.

[Setting Values: REC button SW Set, Focus]