For setting the marker and safety zone, which are useful in helping you determine the angle of view for the image according to the shooting purpose.
Marker Settings Item
Memo
During Clip Review or when in the Media mode, the markers do not appear regardless of the setting.
Marker
For setting whether to display marker, safety zone, and center marks on the screen.
[Setting Values: On, 
Off]
Grid Marker
For setting whether to display a 3x3 grid on the screen.
[Setting Values: On, Off]
Memo
When [Grid Marker] is set to “On”, [Aspect Ratio], [Aspect Marker], and [Safety Zone] do not function.
Aspect Ratio
For selecting the final image aspect ratio to be used from the overall angle of view.
[Setting Values: 16:9(+4:3), 2.35:1, 1.85:1, 16:9, 1.75:1, 1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center, 2.35:1 Top, 1.85:1 Center, 1.85:1 Top]
Memo
When [System] 
[Record Set] [Record Format] [SD Aspect] is set to “4:3”, this item is fixed at “4:3” and cannot be selected.
Aspect Marker
For specifying how boundary markers are to be used to indicate the parts of an image that are beyond the range of the aspect ratio selected in [Aspect Ratio].
Line+Halftone:
Displays the boundary using lines, and areas outside the boundary in halftone.
Halftone:
Displays areas outside the boundary in halftone.
Line:
Displays the boundary using lines.
Off:
Hides the boundary markers.
[Setting Values: Line+Halftone, Halftone, Line, Off]
Memo
When [Aspect Ratio] is set to “16:9” or “16:9(+4:3)”, this item is fixed at “Off” and cannot be selected.
Safety Zone
For setting the percentage of area that is to be deemed as valid area (Safety Zone) within the boundary of the aspect ratio selected in [Aspect Ratio].
[Setting Values: 95%, 93%, 90%, 88%, 80%, Off]
Center Mark
For specifying whether to display a mark to indicate the screen center within the aspect ratio selected in [Aspect Ratio].
[Setting Values: On, Off]
