Marker and Safety Zone Displays (Camera Mode Only)

The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose.

The marker is displayed only in the Camera mode.

Displaying the Grid Marker

Set [LCD/VF] arrowR

[Marker Settings] arrowR

[Grid Marker] to “On”.

Grid Marker

A grid that divides the screen into 3x3 is displayed.

Memo

When [Grid Marker] is set to “On”, [Aspect Ratio], [Aspect Marker], and [Safety Zone] do not function.

Example of display when [Aspect Ratio] = “4:3”, [Aspect Marker] = “Line+Halftone”, and [Center Mark] = “On”

Memo

You can turn On/Off the safety zone and center mark displays using [LCD/VF] arrowR [Marker Settings] arrowR [Aspect Ratio], [Safety Zone], and [Center Mark].

Safety Zone