Item for specifying settings related to the LCD monitor or viewfinder screen.
This menu screen can be used to specify settings related to the Focus Assist mode, zebra pattern display, screen size, marker, and safety zone. In addition, it is also used for selecting whether to display characters on the LCD monitor or viewfinder screen, as well as for adjusting the picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
Marker Settings...
For setting items such as the safety zone and center mark.
Display Settings...
For specifying display-related settings.
VF SW
For setting whether to assign the operation for pulling out or retracting the viewfinder to the switch.
Enable:
Displays a viewfinder image only when the viewfinder is pulled out.
Disable:
A viewfinder image is displayed regardless of the state of the viewfinder.
[Setting Values: Enable, Disable]
Displays a viewfinder image regardless of the setting when an image is not displayed on the LCD monitor.
VF Color
For selecting whether to display the image on the viewfinder screen in color or black-and-white.
Select “On” to display in color, and “Off” to display in black-and-white.
[Setting Values: On, Off]
VF Bright
For setting the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 ( 0)]
VF Contrast
For setting the difference in luminance between the darkest and brightness areas in the viewfinder screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 ( 0)]
LCD Bright
For setting the brightness of the LCD screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 ( 0)]
LCD Contrast
For setting the difference in luminance between the darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 ( 0)]
LCD Backlight
For setting the brightness of the LCD monitor backlight.
Increasing the value increases the brightness.
[Setting Values: -1, 0, +1]
LCD Mirror
For specifying the image display method when facing the LCD monitor.
Select “Mirror” to display the image after laterally inverting it. (Mirror display)
[Setting Values: Mirror, Normal]
The setting of this item is valid only in Camera mode.
During color bar, expanded focus, menu screen and status screen display, the “Mirror” setting is disabled.
LCD/VF Peaking
For adjusting the contour of the image displayed on the LCD monitor and viewfinder.
[Setting Values: -10 to +10 ( 0)]