This screen displays the media status or event. It is also used to display warnings only.
Media Display 0 Screen
Appears only during warnings
Media Display 1 Screen
Media Display 2 Screen
Media
Displays the media slot ( or ) of the currently played clip.
appears when the write-protect switch of the SD card is set.
Voltage/Battery Power
Displays the current status of the power supply in use.
Displayed in the Media Display 0 screen during warnings only.
Resolution
Displays the video image resolution.
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Operation Guide
Displays a guide for the current operation buttons.
Audio Level Meter
Displays the audio levels of CH1 and CH2.
This item is not displayed when [Main Menu] [LCD/VF] [Display Settings] [Audio Meter] is set to “Off”.
Volume Operation Indicator
The display appears when the volume (0 to 15) of the headphone or speaker changes.
Position bar
Displays the current position in the video.
During trimming, the position bar appears in green, and icons for the in and out points are displayed.
:
Current position of the video
:
Position to start trimming
(In point)
:
Position to end trimming
(Out point)
Information Display
The camera information display turns on and off each time you press the [OIS/6] button.
Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded.
Trimming information is displayed while trimming is in progress. In this case, pressing the [OIS/6] button does not switch the display.
Date/Time Display
Displays the date/time that is recorded on the currently played SD card.
The date/time display style can be specified in [LCD/VF] [Display Settings] [Date Style]/[Time Style].
Network Connection Icon
The network connection status is displayed when [Main Menu] [System] [Network] is set to “On”.
This icon is not displayed when “Off” is selected.
Icon |
Status |
---|---|
(Blink) |
Connection is not established (starting up, preparing for connection) |
(Yellow) |
Connection is not established (preparing for connection) |
Connection is established |
|
When a USB adapter different from the connection settings is detected |
|
(No display) |
When an incompatible USB adapter is detected, or when [Network] is set to “Off” |
When a cellular adapter that supports LTE connection display is in use, “LTE” will appear to the left of the above icon when LTE connection is detected.
Time Code ( )/User’s Bit ( ) Display
Displays the time code (hour: minute: second: frame) or user’s bit data recorded in the SD card being played back.
Example of time code display:
Colon (:) denotes non-drop frames and dot (.) denotes drop frames.
Example of user’s bit display:
You can specify whether to display the time code, user’s bit, or turn off the display in [TC/UB] of [Main Menu] [LCD/VF] [Display Settings].
Event/Warning Display Area
Displays error messages.
Media Status
PLAY:
Playing
STILL:
Still picture playback mode
FWD *:
High-speed playback in the forward direction (* playback speed: 5x, 15x, 60x, or 360x)
REV *:
High-speed playback in the reverse direction (* reverse playback speed: 5x, 15x, 60x, or 360x)
STOP:
Stop mode
P.OFF:
Power OFF
Check Mark
Displayed when the currently played clip is selected.
OK Mark
Displayed when OK mark has been appended.
Clip Information
Displays current clip number/total number of clips.