You can change the brightness and peaking of the viewfinder screen according to your usage conditions.
Changing the brightness of the screen will not affect the recorded images.
A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, AV output, or HDMI output.
Adjust the visibility adjustment lever to sharpen the image on the viewfinder screen.
Use the [VF Bright] menu to adjust the brightness of the viewfinder screen.
[Main Menu] [LCD/VF] [VF Bright]
Use the [LCD/VF Peaking] menu to adjust the contour of the viewfinder.
(The contour of the LCD monitor will also be adjusted at the same time.)
[Main Menu] [LCD/VF] [LCD/VF Peaking]
Use the [VF Contrast] menu to adjust the contrast of the viewfinder screen.
[Main Menu] [LCD/VF] [VF Contrast]
If [Main Menu] [LCD/VF] [VF SW] is set to “Enable”, pull out the viewfinder before making any adjustment.
Displaying in Black and White
You can display the viewfinder screen in black and white.
[Main Menu] [LCD/VF] [VF Color] item Press Set button ( ) Select “Off” Press Set button ( ).