Menu screen for specifying operation settings during shooting.
Camera Function Menu
This item can only be selected in the Camera mode.
Chroma Aberration
For configuring whether to apply ALAC (Auto Lens Aberration Compensation) to reduce chromatic aberration of magnification which appears as colored outlines.
Auto:
Configures to ALAC automatically when an ALAC-compatible lens is used.
Off:
Disables the ALAC function.
[Setting Values: 
Auto, Off]
Memo
This function does not support CAC lenses, which adopts a different method of compensation from ALAC lenses.
This function does not correct axial chromatic aberration.
When in the “Auto” mode, chromatic aberration correction is functioning if chromatic aberration correction on the status screen (camera) is configured to “On”.
Pixel Mapping
Detects white spots in the sensor and performs correction to reduce the defect. To perform pixel mapping, do so in the Camera mode after attaching the lens cap.
[Setting Values: Execute, Cancel]
Memo
It is recommended to use the AC adapter as the power supply.
Selection for this item is disabled when [System] is configured to “High-Speed”.
Shutter
For specifying shutter-related settings.
When “Slow” or “Step/Variable” is selected, configure the shutter speed by pressing “SEL” of the [SHUTTER] switch and using the cross-shaped button ( 
).
The cross-shaped button ( 
) can also be used to switch between step and variable.
Slow:
Configures the shutter speed to low speed.
EEI:
Select this to perform automatic control of the shutter.
Step/Variable:
Step mode switches the shutter speed in fixed values. Selecting Variable configures the setting to variable scan. Use this setting when shooting a PC monitor.
[Setting Values: Slow, EEI, Step/Variable]
Memo
When “J-Log1” or “HLG” is selected for [Camera Process] 
[Color Space], “EEI” cannot be selected.
AE Level
For setting the convergence level during AE (Auto Exposure).
[Setting Values: -6 to +6 ( 0)]
Memo
When “J-Log1” or “HLG” is selected for [Camera Process] [Color Space], [AE Level] cannot be configured.
AE level can also be configured using the cross-shaped button ( ) after operating the user button that is assigned with the AE Level function.
AE Speed
For setting the convergence speed during AE (Auto Exposure).
[Setting Values: Fast, Middle, Slow]
AE Area
For configuring the AE detection area.
[Setting Values: Center, Bottom, Normal]
AGC Limit
For setting the maximum gain value of “AGC”, which electrically boosts the sensitivity level according to the brightness automatically.
When [LCD/VF] [Display Type] [Gain] is set to “dB”:
[Setting Values: 30 dB, 24 dB, 18 dB, 12 dB, 6 dB]
When [LCD/VF] [Display Type] [Gain] is set to “ISO”:
[Setting Values: ISO 25600, ISO 12800, ISO 6400, ISO 3200, ISO 1600]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, F2, Open]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when auto iris is enabled.
[Setting Values: F16, F11, F8, F5.6]
EEI Limit
For setting the shutter speed control range when the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, 3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT.BAL] switch.
[Setting Values: On, Off]
Memo
This function is disabled when AGC is operating.
Gain
For configuring the speed at which gain changes when [Smooth Trans] is set to “On”.
[Setting Values: Fast, , Middle, Slow, Off]
Shutter
For configuring the speed at which the shutter changes when [Smooth Trans] is set to “On”.
[Setting Values: Fast, , Middle, Slow, Off]
White Balance
For configuring the speed at which white balance changes when [Smooth Trans] is set to “On”.
[Setting Values: Fast, , Middle, Slow, Off]
FAW
For setting the position in the white balance switch [WHT.BAL] to assign the FAW (Full Auto White Balance) function.
[Setting Values: B, A, PRST, None]
FAW Speed
For configuring the operation speed of FAW (Full-time Auto White Balance)
[Setting Values: Fast, Middle, Slow]
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the [GAIN] selection switch.
The setting is fixed at “AGC” in the Full Auto mode. In addition, the sensitivity setting in [Lolux] is used.
When [LCD/VF] [Display Type] [Gain] is set to “dB”:
[Setting Values: AGC, 30 dB, 27 dB, 24 dB, 21 dB, 18 dB, 15 dB, 12 dB, 9 dB, 6 dB, 3 dB, 0 dB, -3 dB, -6 dB]
(Default values for GAIN L: 0dB, GAIN M: 6dB, GAIN H: 12dB)
When [LCD/VF] [Display Type] [Gain] is set to “ISO” and [Camera Process] [Color Space] is set to a value other than “HLG”:
[Setting Values: AGC, ISO25600, ISO20000, ISO16000, ISO12800, ISO10000, ISO8000, ISO6400, ISO5000, ISO4000, ISO3200, ISO2500, ISO2000, ISO1600, ISO1250, ISO1000, ISO800, ISO640, ISO500, ISO400]
(Default values for GAIN L: ISO800, GAIN M: ISO1600, GAIN H: ISO3200)
Memo
“AGC” cannot be selected when “J-Log1” or “HLG” is selected for [Camera Process] [Color Space].
When “J-Log1” is selected for [Camera Process] [Color Space], the base ISO speed for achieving the 800% dynamic range of [J-Log1] is “[ISO1000]”. The square brackets appear only in the case of the base ISO.
Lens REC
For selecting a function to be assigned to the Record button (VTR button, etc.) on the lens.
A menu is displayed only when the FS-790 or FS-900 is connected.
Intercom2:
Turns on/off the Intercom 2 connection.
Intercom1:
Turns on/off the Intercom 1 (intercom) connection.
Rec:
Starts/stops recording.
[Setting Values: Intercom2, Intercom1, Rec]
Memo
This function is available when it can be assigned to the Record button (VTR button, etc.) on the lens in use.
Configure to “Intercom1” when configuring the intercom with the FS-790 connected.
When the FS-900 or FS-790 is connected, the functions of “Intercom1” and “Intercom2” can also be assigned to a user button.
User Switch Set...
For specifying user button related settings.
Full Auto...
For configuring the Full Auto settings.
Camera Angle[Tagging] 
For specifying tagging settings for the camera angle.
[Setting Values: SB, SL, EZ, SL2, EZ2, TV]
